SG331

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Inrush current limiters (ICLs) are a type of electronic device designed to control and limit the inrush current a system on startup. Inrush current can be several times greater than the normal operating currents, often causing fuses and circuit breakers to trip, and can damage sensitive components. By controlling inrush current, ICLs can prevent issues such as these in a number of applications. The SG331 is an example of an inrush current limiter designed for use in a range of industrial applications.

The SG331 is a simple, reliable, and cost-effective solution for controlling inrush currents. It is a multipurpose solid state device that uses a combination of resistance and capacitance to limit inrush currents. It can support low frequency control of DC and AC inrush currents to a maximum of 150A. It also provides protection to a panel of I/O devices by limiting peak inrush current.

The device is designed to be inserted in series into the power circuit and needs no external power. It has a very low power consumption and power dissipation. It is also compatible with a wide variety of input voltages, and can be used with both AC and DC power supplies. The SG331 is encapsulated in a plastic housing which provide it with a high level of protection from dust, moisture, and other environmental factors.

The SG331 features dual outputs: one for voltage control and one for current control.- The voltage output controls the normal operating voltage and is intended for use with resistive loads. The current output is used to control peak current levels, and is designed for applications with inductive loads. This dual output allows the device to be used in a wide variety of applications, such as motor control.

The SG331 has two main components: a resistor and a capacitor. The resistor is used to limit inrush current and the capacitor is used to store energy. To limit inrush current when the device is switched on, the current flow must be sufficient to charge the capacitor to a given voltage level. At this point, the resistor limits the current flow, and the capacitor supplies power to the load, helping to stabilise the voltage across the load.

The SG331 is typically used in a range of industrial applications. It can be used in motor control circuits, power supplies, welders, power capacitors, and other high current devices. It can also be used to increase the life cycle of sensitive components and improve the system’s overall reliability. All of these features make the SG331 an ideal solution for controlling inrush currents in a variety of applications.

The specific data is subject to PDF, and the above content is for reference