SG333

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Inrush Current Limiter (ICL) is a device that limits the inrush current of an electronic component or system. It works by reducing the voltage during the start up phase, thus limiting the current. An SG333 is a type of Inrush Current Limiter. It can be used for various applications such as motor starting, transformer inrush current limiting and load switching.

The operating principle of the SG333 depends on the magnetic saturation of its core. The core of the ICL is made of a low loss ferrite material. At the start of the circuit, the initial current is very high and causes the core to become saturated. As saturation occurs, the inductance of the core reduces, thus limiting the amount of current available. The SG333 has a high saturation point and is designed to absorb the majority of the current.

The device has two parts: the core and the resistor. The core is made of ferrite material and helps to limit the inrush current. The resistor is used to limit the amount of current available in a certain period of time. The device limits the inrush current for a certain period and then resumes normal operation.

The SG333 is typically used in AC systems, and it is designed for safety and reliability. It works by limiting the chances of over-current and voltage spikes occurring during the start of the AC circuit. It reduces the risk of device failure and damage due to inrush currents.

The SG333 is a versatile device that can be used in various applications. It can be used in industrial systems, power supplies, LED lighting and other applications that require inrush current limiting. The device is simple to use and is affordable. It has a high saturation point and is designed to absorb the majority of the current.

The SG333 is a valuable tool in preventing over-current and voltage spikes. It is easy to install and use, and it is cost-effective. The device eliminates the need for additional components such as surge protectors and fuses. The SG333 is a reliable and effective way to limit the inrush current of an electronic system or component.

The specific data is subject to PDF, and the above content is for reference