SHT10 Sensors, Transducers |
|
Allicdata Part #: | 1649-1060-2-ND |
Manufacturer Part#: |
SHT10 |
Price: | $ 0.00 |
Product Category: | Sensors, Transducers |
Manufacturer: | Sensirion AG |
Short Description: | SENSOR HUMI/TEMP 5V DTL 4.5% SMD |
More Detail: | Humidity Temperature Sensor 0 ~ 100% RH Digital ±4... |
DataSheet: | SHT10 Datasheet/PDF |
Quantity: | 1000 |
Series: | SHT1 |
Packaging: | Tape & Reel (TR) |
Part Status: | Last Time Buy |
Sensor Type: | Humidity, Temperature |
Humidity Range: | 0 ~ 100% RH |
Output Type: | Digital |
Output: | 12b |
Accuracy: | ±4.5% RH |
Response Time: | 8s |
Sensitivity: | -- |
Voltage - Supply: | 2.4 V ~ 5.5 V |
Mounting Type: | Surface Mount |
Operating Temperature: | -40°C ~ 123°C |
Package / Case: | 10-SMD Module |
Supplier Device Package: | 10-LCC |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
- Humidity, Moisture Sensors
-
- SHT10 application field and working principle
SHT10 is an intelligent low-cost digital humidity and temperature sensor with calibrated digital signal output. It is widely applied in climate, weather, automotive and home appliances control systems. Its working principle includes two stages, one is a capacitive humidity detection layer and the other is a thermal conductivity detection layer. The detection layer is connected to the surface of the chip, and the signal processing circuit is covered to the surface.
When the user puts the SHT10 sensor in an environment, the air humidity is detected by the capacitive humidity sensing layer. The reading of the humidity reading is detected by the signal processing layer and converted into a digital signal. The temperature sensor senses the temperature of the environment by measuring the heat transfer of the environment. Then the signal processing layer converts this data into digital form, and the user can read the humidity and temperature of the environment.
The SHT10 sensor module is composed of three main parts, the analog output, the digital output, and the control unit. The analog output is used to output uncalibrated raw signals. Since the signals are not calibrated, the accuracy of the measurements is relatively low. The digital output is calibrated by the signal processing circuit and the accuracy of the measurement is much higher. The control unit controls and calibrates the sensor module, monitors the power, and outputs digital data signals to other devices.
The SHT10\'s application fields include climate, weather and industrial process control, automotive and home appliances, medical and sanitary systems, and many other places. Its digital output format is extremely easy to use, making it an ideal choice for these applications. It can accurately measure the temperature and humidity in a wide range of conditions, and is highly resistant to environmental noise. The digital signal also makes it easy for the user to access the data at any time.
From the above paragraphs, it is clear that the SHT10 sensor is an excellent choice for applications needing to measure temperature and humidity. Its digital output is especially useful for applications where calibration is necessary, and its low cost makes it attractive to a wide range of users. The sensor is very durable and can provide accurate data even in extreme environmental conditions.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
SHT1-250C060DE | Ohmite | 9.26 $ | 17 | RES CHAS MNT 240 UOHM 0.5... |
SHT10 | Sensirion AG | -- | 1000 | SENSOR HUMI/TEMP 5V DTL 4... |
SHT1-200C075DE | Ohmite | 11.36 $ | 7 | RES CHAS MNT 375 UOHM 0.5... |
SHT1-500C075DE | Ohmite | 17.44 $ | 4 | RES CHAS MNT 150 UOHM 0.5... |
SHT11 | Sensirion AG | 10.25 $ | 900 | SENSOR HUMID/TEMP 5V DTL ... |
SHT15 | Sensirion AG | -- | 4400 | SENSOR HUMID/TEMP 5V DTL ... |
SENSOR RHT DGTL PWM AUTO 6DFNHumidity Te...
SENSOR HUMI/TEMP 3.3V I2C 2% SMDHumidity...
SENS HUMIDITY 5V ANLG 3.5% 3SIPHumidity ...
SENSOR HUMI/TEMP 3.3V I2C 3% SIPHumidity...
SENSOR HUMID/TEMP 3V I2C 2% SMDHumidity ...
SENSOR HUMID/TEMP 3V I2C 2% SMDHumidity ...