SI4762-A10-AMR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SI4762-A10-AMR is a monolithic RF receiver module, which is primarily used in radiofrequency (RF) system receivers. It is the RF receiver of choice for applications such as public broadcasting (terrestrial radio), satellite radio, and cellular radio. The SI4762-A10-AMR offers many features that make it an ideal choice for wireless communication receivers such as high sensitivity, wide dynamic range, low power consumption, and low noise figure.

The SI4762-A10-AMR is a Frequency Selective Receiver (FSR) module and provides analog and/or digital signal output. The FSR module consists of an integrated low noise amplifier (LNA), programmable crystal filter, and programmable automatic gain control (AGC). The FSR has a low intermediate frequency (IF) of 452 kHz with a 200 kHz bandwidth. It also has a programmable IF filter and gain control, which allows the designer to optimize the system performance.

In addition to the LNA, crystal filter, and AGC, the SI4762-A10-AMR provides a I/Q and Power Monitor Mode, which is used for digital demodulation. The I/Q and Power Monitor Mode allows the designer to measure the input signal quality and strength (in dBm) as well as monitor the output power of the device. This mode is also useful for performing advanced digital demodulation.

The SI4762-A10-AMR is capable of receiving signals from the near and far field. It can receive signals in the frequency range of 0.5 to 3 GHz with a selectivity of 43 dB. It offers high sensitivity with a noise figure of -101 dB. The temperature range is -25 to 75°C, and the supply voltage is +3.3V.

The working principle of the SI4762-A10-AMR involves using the RF signal as the input to the receiver module. The RF signal is then passed through the low-noise amplifier (LNA), which amplifies the signal up to three dB. From the LNA, the signal is passed through a narrow, tunable filter, which is programmed with crystal controls. This tunable filter cleans up the signal and filters out any out of band signals. Finally, the signal is then passed to the Automatic Gain Control (AGC), which is responsible for keeping the out of band signals from saturating the receiver.

The AGC adjusts the gain of the receiver for optimum sensitivity. It also performs signal equalization, which is useful for extracting the data from the signal. Once the signal is processed through the narrow filter, the signal is then passed to the mixer stage. The mixer converts the signal to an intermediate frequency (IF), which is then filtered and amplified further. Finally, the signal is converted to a baseband signal, which can be processed and demodulated for data.

The SI4762-A10-AMR is a highly efficient RF receiver module that is ideal for applications that require high sensitivity, wide dynamic range, low power consumption, and low noise figure. It is especially useful in modern radio receivers that are used in public broadcasting, satellite radio, and cellular radio. By using the I/Q and Power Monitor Mode, developers can optimize system performance and easily monitor signal quality and strength. The SI4762-A10-AMR is the perfect solution for wireless communication receivers.

The specific data is subject to PDF, and the above content is for reference