SI8233BB-D-IM1R

Rise / Fall Time (Typ):	12ns, 12ns
Approvals:	CQC, CSA, UR, VDE
Package / Case:	14-VDFN
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 125°C
Voltage - Supply:	6.5 V ~ 24 V
Voltage - Forward (Vf) (Typ):	--
Current - Peak Output:	4A
Current - Output High, Low:	2A, 4A
Series:	Automotive, AEC-Q100
Pulse Width Distortion (Max):	5.6ns
Propagation Delay tpLH / tpHL (Max):	60ns, 60ns
Common Mode Transient Immunity (Min):	45kV/µs
Voltage - Isolation:	2500Vrms
Number of Channels:	2
Technology:	Capacitive Coupling
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Overview

The SI8233BB-D-IM1R Isolator - Gate Drivers is a silicon-controlled rectifier (SCR) based high-efficiency digital isolator. This device can be used to isolate signals between two systems or subsystems on the same board or between two boards in a system. It is designed to provide a low-cost, high-efficiency solution in a very small form factor. This paper will discuss the application field and working principle of the SI8233BB-D-IM1R Isolator - Gate Drivers.

Application Field

The SI8233BB-D-IM1R Isolator - Gate Drivers can be used in a variety of different applications. One of its primary functions is to isolate signals between two systems or subsystems. In addition, this device can be used for RS-232 level shifting, I2C level shifting, or as a voltage protector for digital systems. It can also be used for signal conditioning and isolation in medical imaging systems, automotive, industrial and instrumentation systems. This device is also suitable for other applications such as isolating the power or data signals in a DC/DC converter, isolating the power in a motor control circuit, and isolating the power in a high voltage power supply.

Working Principle

The SI8233BB-D-IM1R Isolator - Gate Drivers is based on a silicon-controlled rectifier (SCR). The SCR is a three-terminal structure consisting of an anode, a control terminal, and a cathode. The device works by controlling the flow of current from the anode to the cathode. When the control terminal is activated, the SCR is turned on, allowing current to flow from the anode to the cathode. When the control terminal is deactivated, the current flow stops and the SCR is turned off.The SI8233BB-D-IM1R Isolator - Gate Drivers uses a digital isolator as the core of its architecture. The digital isolator provides isolation between two systems or subsystems by converting digital pulses into isolated digital pulses. The input digital signal is first passed through an array of diodes which are connected in an alternating fashion. This creates a positive voltage signal on one side and a negative voltage signal on the opposite side of the array. This voltage differential causes a pulse to be generated when the voltage is detected by the isolation amplifier. The generated output pulses from the isolation amplifier are then passed to the isolator output. The SI8233BB-D-IM1R Isolator - Gate Drivers also incorporates an FET as an integral part of the device. The FET is used to control the on/off state of the device. When the FET is in the "on" state, the device is able to drive and control the signal. When the FET is in the "off" state, the device becomes disabled and no signal is transmitted.

Conclusion

The SI8233BB-D-IM1R Isolator - Gate Drivers is a highly efficient and cost-effective digital isolator used to isolate signals between two systems or subsystems. It uses a SCR and a digital isolator as its main components and an FET to control its state. Additionally, it can be used for RS-232 level shifting, I2C level shifting, and as a voltage protector for digital systems. This device can be used for a variety of applications, making it a versatile and valuable tool for both the power and the digital system.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description