SI8400AB-A-ISR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Digital isolators are electrical components that have the ability to electrically isolate one circuit from another. The most commonly used isolators are those that use opto-isolators technology. The SI8400AB-A-ISR is an opto-isolator manufactured by Silicon Laboratories. It incorporates a single channel transistor-transistor-logic (TTL) compatible opto- isolator on a single CMOS integrated circuit. It is designed for a wide variety of digital isolator applications.

The SI8400AB-A-ISR is designed for data communication and communication bus management in a variety of digital isolator applications. It operates with a characteristic threshold voltage of 2.4 volts, and a maximum open circuit voltage of 8.0 V. It can transmit and receive digital signals as well as protocols such as I2C, UART, SPI, etc.

The main application for the SI8400AB-A-ISR is digital isolation. It protects the circuit by providing an electrical barrier between two circuits, thus preventing the flow of electric current, and potential damage due to unwanted short circuits. The SI8400AB-A-ISR is capable of providing up to 1.5 kV RMS isolation. It is also able to provide isolation from voltages up to 500 V Max for AC and 800 VMax for DC applications.

The SI8400AB-A-ISR is also suited for applications such as data communications, power line protection, industrial automation, high voltage motor control, medical equipment, and more. Its compact size and low power draw make it an ideal choice for these applications. It is available in an 8-Pin SOIC-8 package and can operate over an industrial temperature range from -40°C to +115°C.

The way the SI8400AB-A-ISR works is by utilizing a two-transistor opto-isolator. The opto-isolator is composed of two separate components: a diode, and an NPN or PNP transistor. The diode is used to convert the electrical input signal into light radiation. The output is then picked up by the photovoltaic cell, which in turn passes the electrical signal to the base of the transistor. The collector is then used to feed the output signal via a series resistor. The opto-isolator can be used to both send and receive signals, and therefore can be used for bidirectional communication.

In conclusion, the SI8400AB-A-ISR is an opto-isolator that is designed for digital isolation applications. It has a wide operating voltage range and low power consumption. It utilizes a two-transistor opto-isolator for bidirectional communications. Its small size and high isolation make it an ideal choice for a variety of applications, especially those requiring high voltage isolation.

The specific data is subject to PDF, and the above content is for reference