SI8631BD-B-IS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Digital isolators are electrical circuits that allow signal transfer between two segments of a system while isolating the two sections from each other, usually for electrical or safety reasons. In this article, we will discuss the application field and working principle of the popular SI8631BD-B-IS digital isolator.

The SI8631BD-B-IS is a high voltage digital isolator used to galvanically isolate two signal lines in order to meet safety requirements. It is typically used in applications such as medical, military, industrial, and consumer electronics. It is a 5.7kVrms isolation rating, with a peak non-repetitive surge voltage of 25kV (temperature coefficient 0.25%/K). It also has a 3.3 V to 5.5V supply voltage range.

As far as performance is concerned, the SI8631BD-B-IS has a typical propagation delay of 2 ns, with a maximum rise/fall time of around 5.5 ns. It also has an isolation voltage of 5.7kVrms, which is more than enough for most applications. All of these features combine to make the SI8631BD-B-IS a reliable, low cost and high-performance digital isolator.

In general, the working principle of a digital isolator is quite simple. First, the signal is transferred from one side of the isolator to the other via small capacitors. This capacitance is what allows the signal to cross the isolation barrier with no contact between the two sides. The signal is then sent to the receiving side, where it is amplified and output. The output signal is then sent back to the original side.

The SI8631BD-B-IS digital isolator is also equipped with a core loss protection circuit that helps protect the circuit from over-temperature damage. This protection circuit will turn off the isolator in the event of an over-temperature condition, thus preserving the integrity of the system. Additionally, the isolator also features an under-voltage lockout (UVLO) protection circuit that will prevent the device from operating if its supply voltage is too low.

Overall, the SI8631BD-B-IS digital isolator is a reliable, high-performance device that is suitable for many types of applications. It has a high voltage rating, low signal loss and fast propagation delay, making it a great choice for isolating signals of varying strength. Moreover, its core loss protection and UVLO protection circuits make it even more reliable and safe to use. With its many advantages, the SI8631BD-B-IS digital isolator is an excellent choice for designers who require a reliable solution in isolating signals.

The specific data is subject to PDF, and the above content is for reference