SIDC81D120E6X1SA4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes can be classed as either rectifiers or switching devices. A rectifier is a device that only passes current in one direction, while a switching device can pass current in both directions. SIDC81D120E6X1SA4 is a type of single rectifier diode, which is essentially an electronic component used to convert alternating current (AC) to direct current (DC). It is designed to offer high-speed hyperfast recovery, high stability and low forward voltage drop.

The most common application of a SIDC81D120E6X1SA4 is in AC to DC power conversion and power supply designs. As such, it is often used in power rectifier circuits, voltage double circuits and for low-voltage power supply applications. The diode also is used for the protection of delicate electronic equipment from transient voltage spikes by limiting the voltage and current flow. Additionally, it is often employed as a protection measure in almost any general application where AC to DC conversion is needed but high frequency interference must be suppressed.

The SIDC81D120E6X1SA4 rectifier diode is designed to handle peak repetitive reverse voltage up to 1200 Volts and its maximum repetitive peak forward surge current is rated at 140 A (TJ = 115°C). It also has high rectification efficiency at 16 A forward continuous current, and its forward voltage drop at that same current is 0.85 V.

In terms of its working principle, the SIDC81D120E6X1SA4 operates by allowing current to flow through the diode in one direction at reduced voltage, while blocking the flow of current in the opposite direction. This process is referred to as rectification, with the “rectifying” part of the diode acting as a switch that can be opened and closed. As a result, the incoming AC waveform is converted into a pulse DC waveform. The reverse voltage of the diode is determined by the power supply voltage driving the diode, and is therefore known as reverse-breakdown voltage.

To conclude, the SIDC81D120E6X1SA4 is a single rectifier diode that offers high-speed hyperfast recovery, high stability and low forward voltage drop. It is widely used in AC to DC power conversion, power supply designs, power rectifier circuits, and voltage double circuits, and can be employed as a protection measure against transient voltage spikes and high frequency interference. Its operation is based on allowing current to flow in one direction at reduced voltage, while blocking the flow of current in the opposite direction.

The specific data is subject to PDF, and the above content is for reference