SJPZ-N40VR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are electrical devices used to regulate voltages, currents, and the like. In particular, Zener diodes, which come in many shapes and sizes, are used to restrict the amount of current passing through them in order to regulate voltages. The SJPZ-N40VR is a single Zener diode specifically designed to control current flow between 3.3 and 100 volts, making it a viable solution for applications across a wide range of devices and designs.

The SJPZ-N40VR is an NPN-P type diode, meaning it exhibits a positive voltage drop across it when current passes through the diode. Its cut-in voltage in a typical application is about 3.3 volts and its maximum reverse voltage is 100 volts. This makes it suitable for a variety of applications that require regulation of lower voltages such as microcontroller circuits and other low-current circuits.

In terms of its use in various applications, the SJPZ-N40VR is often used as a voltage regulator in microcontroller designs. Its low reverse voltage allows for regulation of voltages close to that of the microcontroller, making it a viable solution for protecting against voltage spikes or drops that may occur during the operation of the circuit. Additionally, the SJPZ-N40VR is often used in lighting systems, as its voltage drop is close to that of typical LED lighting. This makes the SJPZ-N40VR a popular choice for those designing LED circuits.

In terms of its physical characteristics, the SJPZ-N40VR is a relatively small diode, measuring only 13mm in width and 10mm in length. This makes it ideal for circuits which require a small footprint, such as those developed for use in mobile phones, laptops, and other small devices. The SJPZ-N40VR is manufactured using a variety of technologies, including dielectric isolation and flip-chip assembly, allowing designers to tailor the device to their particular needs.

When it comes to installation of the SJPZ-N40VR, the diode can be soldered directly to the printed circuit board, or it can be mounted directly on the PCB by using a surface-mount technique. The device should be connected in reverse to prevent current from flowing in the wrong direction. A resistor or other current-limiting device should also be connected in series with the diode in order to further protect the device from excessive current flow.

The SJPZ-N40VR is considered a reliable and low-maintenance device, with a relatively long life-span and low cost when compared to other similar Zener diodes. This makes it an attractive solution for designers looking for a cost-effective way to regulate low-voltage circuit designs. The device’s low reverse voltage, small size, and long life-span are just a few of the features that make the SJPZ-N40VR an attractive choice for designers in a variety of applications.

The specific data is subject to PDF, and the above content is for reference