SL10 25002

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Inrush Current Limiters (ICLs) are special components that are designed to provide variable, instantaneous current limiting when applied in series with a load. They can be used to limit the surge of current that occurs when a load is first powered up, and they can also be used to limit current when an otherwise low-impedance path is suddenly presented. The SL10 25002 is a type of ICL that can be used to reduce peak inrush currents in sine-wave applications.

The SL10 25002 works by sensing the initial current flow over a resistance value and providing an LED on-off feedback loop to rapidly limit the current flow during start-up. This loop works in parallel with the load, allowing the load to be powered up without experiencing large inrush currents.

Specifically, the SL10 25002 has an adjustable current setting that is set when the ICL is installed. When the load is powered up, the ICL senses the current over the resistance value and limits it to the adjustable setting. The current limiting affects both the peak current and the time that the current is held at the peak level. By limiting the peak current, the damaging effects of high inrush currents are reduced and the load is able to survive powering up without failure.

The SL10 25002 is designed to be installed in applications where short-term, high-current pulses are of concern. It can be used in a wide range of power supplies, motor controllers, and switchgear. It is typically used in power supplies, motor controllers, and switchgear for power-up current control and DC-to-DC converters, to suppress line transients. The SL1025002 is primarily used in industrial, military, and aerospace applications and provides excellent curve-continuous current limiting.

The SL10 25002 operates with a wide range of input voltages and can withstand temperatures up to 155°C. It has a low on-resistance and fast turn-off time, and it offers excellent thermal stability. It is also efficient, using only 150mA for operation. The SL10 25002 is available in three different packages which allow the user to select the most suitable package for their application.

The SL10 25002 is an excellent solution for reducing the dangerous effects of high current during power-up and short-term transients. It can be used in a wide variety of industrial, military, and aerospace applications. Its adjustable current setting, wide temperature range, low on-resistance, and fast turn-off time make it a reliable and efficient inrush current limiter.

The specific data is subject to PDF, and the above content is for reference