SL1021A600RS

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Gas discharge tube arresters (GDTs), also commonly referred to as surge arresters, are a type of surge protective device (SPD) designed to protect electrical and electronic equipment from damage caused by lightning strikes and other transient events. The SL1021A600RS is a type of GDT which acts as a low-impedance path to shunt transient currents away from sensitive electrical equipment. It is most commonly used in industrial applications.

The SL1021A600RS features a non-linear board-mounted gas tube with a built-in surge limiter chamber, which regulates the voltage reaching the system. The device can handle up to 600V of transient voltage and is rated to operate between -40°C to +85°C. It is designed with a high dielectric strength for extra protection against short-duration voltage surges. The SL1021A600RS meets IEC 61000-4-5 for lightning protection, UL1449 standards, FCC for ESD, and is UL listed.

The working principle of the SL1021A600RS is based on the behaviour of gas filled tubes. When a surge of over-voltage strikes, the current flow through the tube causes the gas inside to ionize, and form a conductive path to the ground. This surge is discharged to the ground, protecting the system from equipment failure or damage. The gas used in the SL1021A600RS is a noble gas, such as argon or xenon, which is non-flammable and safe to use. Once the surge has been discharged, the ionized gas returns to its original state and the tube is ready to react to another surge event.

The SL1021A600RS is a versatile GDT, suitable for use in a range of industrial applications. These include communications networks, industrial control systems, automotive systems, build-control systems, medical electronics, and general-purpose electronics. The device is designed to be installed in series within the power supply line, between the equipment and the power source, to protect against power surges.

In summary, the SL1021A600RS is a GDT designed to protect industrial systems from lightning and other transient events. It operates on the principle of forming a low-impedance path to ground during surge events, ensuring the safety of sensitive electronic equipment from damage or malfunction. The device is rated to handle up to 600V and meets standards such as IEC 61000-4-5, UL1449, and FCC for ESD.

The specific data is subject to PDF, and the above content is for reference