SL10 40002-B

Series:	SL10
Packaging:	Bulk
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
R @ 25°C:	40 Ohms
Tolerance:	±20%
Current - Steady State Max:	2A
R @ Current:	650 mOhms
Diameter:	0.433" (11mm)
Lead Spacing:	0.201" (5.10mm)
Approvals:	UR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SL10 40002-B is an Inrush Current Limiter (ICL) used in AC or DC circuits to limit inrush current. It is designed to limit the amount of current that flows into an AC or DC circuit when it is initially switched on and to prevent excessive inrush currents from damaging thecircuit. Inrush current is created when a switch is closed while an AC or DC electric circuit is charging or when it is first disconnected from a charging source. Inrush current can cause damage to components even if the device is rated to handle the load, as it is much higher than the steady-state current into the device. Inrush current is the cause of many problems, including blown fuses, circuit breakers tripping, or malfunctioning components.A typical ICL like the SL10 40002-B consists of an energy storage device such as an inductor or capacitor, a resistor, and a diode. The energy storage device is a key component of the limiter and is responsible for storing the energy that is released when the inrush current is triggered. This energy is then dissipated slowly over time, thus limiting the maximum current.The working principle of the SL10 40002-B is simple. When an AC or DC circuit is switched on, a large inrush current is created as the circuit charges up. The SL10 40002-B acts as a surge protector, clamping the inrush current from reaching damaging levels and allowing the AC or DC circuit to charge up more slowly. The ICL utilizes the energy stored in its inductor or capacitor to limit the current flow. As the inductor or capacitor slowly releases its stored energy, the current flow is gradually reduced, thus limiting the inrush.The SL10 40002-B has many uses, including limiting inrush current in AC or DC circuits, providing circuit protection, and as a surge protector in areas with frequent electrical surges. It is used in a variety of applications, such as automotive, industrial, and consumer electronics.The SL10 40002-B is a reliable device with a fast response time, making it ideal for sensitive applications where fast inrush current limiting is needed. It is designed to work with a wide range of AC or DC voltages and has a maximum inrush current of 10A.In conclusion, the SL10 40002-B is a reliable and cost-effective Inrush Current Limiter (ICL). It is designed to quickly limit inrush current in a wide range of AC or DC circuits and to protect the circuit from damaging current surges. The device features fast response times, a wide range of AC or DC voltages, and a maximum inrush current of 10A. With its reliability and ease of use, the SL10 40002-B is an ideal choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description