SL1021A600R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Gas Discharge Tube Arresters (GDT) are widely used in different construction systems such as communications, power supply systems, telecommunications, and power-related operations to protect against different surge induced overvoltage conditions. SL1021A600R is one among these GDTs, which is used to protect various electrical and electronic apparatuses interconnected in electrical systems from surge induced overvoltage conditions. This GDT can combine both surge protective and lightning protection features for its application.

SL1021A600R is a gas discharge tube manufactured by Storm Laboratories Inc. The GDT is basically a two terminal device, with one end passing current and the other terminal exhibiting the voltage characteristic, with both its breakdown voltage and maximum instantaneous current being improved with airstanding.

The gas discharge tube works on the principle of gas chromatography. It has a pair of electrodes, one with a gas discharge tube (GDT) filled with ions, and the other with a gas cavity containing the return electrode. When the voltage is higher than the breakdown voltage, the electrons in the gas chamber move and form a conducting path between the pair of electrodes leading to an increase in current. The conducting path between the electrodes continues as long as the electrical voltage stays above the breakdown voltage. Once the voltage drops below the breakdown voltage, electrons stop moving and the current decreases.

The working of the SL1021A600R can be summarized as follows: when the voltage applied to the GDT reaches the breakdown voltage, electrons enter the gas chamber and form a conducting path from one electrode to the other. The current can increase until the peak of the voltage wave or until the maximum current rating of the device is exceeded and the tube opens, blocking further current flow. After the current is reduced, if the voltage is still above the breakdown voltage, the tube will remain conducting and the cycle will repeat.

SL1021A600R can be applied in a number of areas such as power supplies, communication lines, radio frequency repeaters, power plants, telecommunication networks, or any other areas that require overvoltage protection and lightning protection. The GDTs are usually mounted in parallel to power, communication, and signal lines to provide effective protection. When the GDT is used in an electrical system, it functions as an overvoltage protector that detects any overvoltage conditions and opens the line to prevent damage to connected equipment. It also provides lightning protection by limiting the current surge created by lightning strikes. This is possible because the GDT conductance decreases with increasing current.

SL1021A600R also acts as an effective surge protector in power systems by dissipating the surge energy through its built-in resistor. This helps to reduce the voltage and current levels and protect against overvoltage in power systems. This GDT can also act as an electromagnetic interference (EMI) filter by attenuating the high frequency components in the surge current.

In conclusion, SL1021A600R is a gas discharge tube manufactured by Storm Laboratories Inc. to protect various electrical and electronic apparatuses from surge induced overvoltage conditions. It works on the principle of gas chromatography and can be applied in a number of areas to provide effective protection, acting as an overvoltage protector, lightning protection, surge protector, and EMI filter.

The specific data is subject to PDF, and the above content is for reference