Allicdata Part #: | 570-1062-ND |
Manufacturer Part#: |
SL32 2R025 |
Price: | $ 1.73 |
Product Category: | Circuit Protection |
Manufacturer: | Ametherm |
Short Description: | ICL 2 OHM 20% 25A 30MM |
More Detail: | Inrush Current Limiter 2 Ohms ±20% 25A 1.220" (31m... |
DataSheet: | SL32 2R025 Datasheet/PDF |
Quantity: | 35713 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
1 +: | $ 1.56870 |
5 +: | $ 1.49310 |
10 +: | $ 1.41876 |
50 +: | $ 1.14471 |
100 +: | $ 0.97052 |
250 +: | $ 0.94563 |
500 +: | $ 0.79632 |
1000 +: | $ 0.70923 |
5000 +: | $ 0.62213 |
Series: | BigAMP |
Packaging: | Bulk |
Lead Free Status / RoHS Status: | -- |
Part Status: | Active |
Moisture Sensitivity Level (MSL): | -- |
R @ 25°C: | 2 Ohms |
Tolerance: | ±20% |
Current - Steady State Max: | 25A |
R @ Current: | 20 mOhms |
Diameter: | 1.220" (31mm) |
Lead Spacing: | 0.307" (7.80mm) |
Approvals: | CSA, UR |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Inrush Current Limiters are a type of device that helps to prevent unexpected and potentially damaging surges of electricity. This is achieved by controlling and limiting the amount of current that can flow through an electrical circuit. The SL32 2R025 is a specific model of Inrush Current Limiter (ICL) which is designed for use in a wide range of applications and has a well-defined working principle.
Inrush current occurs when a device is switched on or when there is a sudden increase in voltage. This sudden increase in current can damage components, cause a power outage, or overheat wiring. The function of ICLs is to limit the amount of current that can flow through a circuit, thereby avoiding any potential damage. The SL32 2R025 is particularly suited for use in scenarios where the current needs to be limited right away, such as when the power is switched on to an appliance.
The SL32 2R025 is a high-performance device, with a maximum continuous current rating of 10A and a surge rating of 25A. It is small in size and can be easily installed onto almost any circuit board. It is suitable for use in a wide range of applications, including industrial equipment, telecommunications systems, computer peripherals, and consumer electronics.
The working principle of the SL32 2R025 is based on a thermistor. A thermistor is a type of resistor whose resistance is based on the temperature. In simple terms, the device works by using the heat generated by the current to decrease its resistance. When the circuit is initially switched on, the resistance of the thermistor is high, limiting the amount of current that can flow through the circuit. As the current continues to flow, the resistor begins to heat up and its resistance gradually decreases, allowing more current to flow through. This effectively limits the peak inrush current, which can help protect any components connected to the circuit.
The SL32 2R025 is a versatile device with a range of applications. It can be used in scenarios where high inrush current needs to be avoided, such as when switching on power to an appliance. It can also be used to protect sensitive electronic components, such as microprocessors, from any sudden increases in current. It can also be used to reduce the amount of energy wasted when a circuit is switched off, by reducing the current that is allowed to flow after the switch is turned off.
The SL32 2R025 is a reliable and efficient device for limiting inrush current. It is easy to install, small in size, and suitable for a wide range of applications. It works on the principle of a thermistor, using the heat generated by the current to gradually reduce its resistance and limit the amount of current that can flow within any given circuit. This can help to avoid any damage to components caused by sudden increases in current.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
SL32 2R025-B | Ametherm | 1.47 $ | 20895 | ICL 2 OHM 20% 25A 31MMInr... |
SL32 2R025 | Ametherm | 1.73 $ | 35713 | ICL 2 OHM 20% 25A 30MMInr... |
SL32 2R023 | Ametherm | 1.73 $ | 14200 | ICL 2 OHM 20% 23A 30MMInr... |
SL32 10015 | Ametherm | 1.73 $ | 14744 | ICL 10 OHM 20% 15A 30MMIn... |
SL32 1R030 | Ametherm | 1.73 $ | 2648 | ICL 1 OHM 20% 30A 30MMInr... |
SL32 10015-B | Ametherm | 1.47 $ | 5743 | ICL 10 OHM 20% 15A 31MMIn... |
SL32 0R530 | Ametherm | 1.73 $ | 5630 | ICL 0.5 OHM 20% 30A 30MMI... |
SL32 1R036 | Ametherm | 1.73 $ | 1000 | ICL 1 OHM 20% 36A 30MMInr... |
SL32 0R536 | Ametherm | 1.73 $ | 1495 | ICL 0.5 OHM 20% 36A 30MMI... |
SL32 1R036-B | Ametherm | 1.46 $ | 483 | ICL 1 OHM 20% 36A 31MMInr... |
SL32 2R023-B | Ametherm | 1.46 $ | 376 | ICL 2 OHM 20% 23A 31MMInr... |
SL32 4R023-B | Ametherm | 1.47 $ | 176 | ICL 4 OHM 20% 23A 31MMInr... |
SL32 0R536-B | Ametherm | 1.46 $ | 81 | ICL 0.5 OHM 20% 36A 31MMI... |
SL32 5R020 | Ametherm | 1.73 $ | 1000 | ICL 5 OHM 20% 20A 30MMInr... |
SL32 0R530-B | Ametherm | 1.46 $ | 104 | ICL 0.5 OHM 20% 30A 31MMI... |
SL32 0R230 | Ametherm | 1.71 $ | 4268 | ICL 0.3 OHM 25% 30A 31MMI... |
SL32 1R030-B | Ametherm | 1.47 $ | 431 | ICL 1 OHM 20% 30A 31MMInr... |
SL32 5R020-B | Ametherm | 1.47 $ | 370 | ICL 5 OHM 20% 20A 31MMInr... |
SL32 4R023 | Ametherm | 1.73 $ | 981 | ICL 4 OHM 20% 23A 30MMInr... |
SL32 0R540-B | Ametherm | 0.91 $ | 1000 | ICL 0.5 OHM 20% 40A 30MMI... |
SL325 | 34.93 $ | 1000 | SOLDERING IRON 23W 120V |
ICL 1.3 OHM 25% 8A 13.97MMInrush Current...
ICL 10 OHM 20% 5A 12MMInrush Current Lim...
ICL 4 OHM 20% 23A 30MMInrush Current Lim...
ICL 16 OHM 20% 4A 22MMInrush Current Lim...
ICL 16 OHM 25% 4A 19.56MMInrush Current ...
ICL 33 OHM 20% 2.5A 15MMInrush Current L...