SL42-M3/57T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are a type of electrical component which acts as a one-way valve for current. Rectifiers are used to convert alternating current (AC) to direct current (DC). Single rectifiers are components that allow only positive current to pass and block negative current. This article will examine the application field and working principle of SL42-M3/57T, which has these qualities.

SL42-M3/57T is a single rectifier which is applicable in different fields, such as DC power supply, AC to DC power conversion, battery charging and circuit testing. It can also be used in telecommunication and medical equipment, thanks to its properties of high reliability, low cost and smaller size.

The device is constructed from four layers. The upper and bottom layers consist of P-type semiconductor material and the middle two layers consist of the N-type semiconductor material. At each end of the device is a glass seal that protects the four layers from outside contaminants. The structure of the device will vary slightly depending on the manufacturer and application for which it is intended.

SL42-M3/57T is a single rectifier with a maximum forward current of 30A and a repetitive peak reverse voltage of 400V. Its average rectification efficiency is greater than 85% and the temperature coefficient of the diode is less than 0.08%/℃. The device has a temperature variable threshold voltage of 0.7V to 0.9V, making it suitable for use in regulated power supplies. It is designed to operate at temperatures between -40 and +85℃.

SL42-M3/57T operates on the principle of electron flow. When a positive current is applied to the P-type layer, the electrons move to the N-type layer, creating a potential difference between the two layers. This potential difference provides the rectification effect, allowing the positive current to pass through the device and blocking the negative current. When the current is reversed, the N-type layer acts as a cathode, allowing the electrons to flow in the opposite direction and blocking the positive current.

SL42-M3/57T is constructed from high-quality materials and has a long life expectancy. It is designed to be used in a wide range of applications, from low current to high current applications. It is a reliable, low cost and small size device that is suitable for use in regulated power supplies, DC power supplies and AC to DC power conversion.

The specific data is subject to PDF, and the above content is for reference