Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SL42HE3_A/I application field and working principle

The SL42HE3_A/I is a single-phase bridge rectifier, a four-diode module that is commonly used in SMPS circuits and general power supplies. Its peak forward surge current rating is 75A while its continuous forward current rating is 6A.

The SL42HE3_A/I is designed to convert alternating current (AC) to direct current (DC). AC power is provided by the utility company, typically at a voltage of 120 V to 230 V. This AC voltage is applied to the input of the four-diode module and is rectified to produce a DC output.

Working Principle

The SL42HE3_A/I uses two pairs of opposite-polarity diodes connected in a bridge configuration. Each pair is connected in parallel and consists of an anode and a cathode. The anode is connected to the positive (or "hot") terminal of the AC power source and the cathode is connected to the negative (or "cold") terminal.

When the AC voltage is applied, the pair of diodes connected in series with the positive terminal conducts first. This causes current to flow in a positive direction, creating a positive DC voltage. As the AC voltage passes through zero, the other pair of diodes in series with the negative terminal conducts, reversing the direction of the current and creating a negative DC voltage. As the AC voltage cycles from positive to negative and back, the direction of the current keeps reversing, producing a "full-wave" output of both positive and negative DC voltage.

The output of the SL42HE3_A/I is a combination of pulsed DC voltage due to the rectifying action of the diodes and an average DC voltage due to imperfect switches. This pulsed DC voltage is typically rectified using an electrolytic capacitor to produce an average DC voltage.

Applications

The SL42HE3_A/I is typically used to bridge the gap between AC and DC power sources. It can be used in a wide range of applications, including power supplies, motor controls, and instrumentation systems. It is especially well-suited for Switch-Mode Power Supplies (SMPS) due to its high surge current capabilities and low forward voltage drop.

The module can also be used in automotive systems, lighting systems, and motor controllers. Its fast switching action makes it ideal for high frequency switching applications. Additionally, the module’s reverse polarity protection makes it suitable for applications where a reverse voltage may be present.

The SL42HE3_A/I is a versatile and cost-effective bridge rectifier module that can be used in a wide range of applications. It is easy to install and provides good electrical performance in SMPS and other applications.

The specific data is subject to PDF, and the above content is for reference