SMAJ4474E3/TR13

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are typically classified into two main families: Zener and single. Zener diodes, also known as avalanche diodes, utilize a reverse-biased Zener junction. This junction is specifically designed to create a highly reliable breakdown voltage and eliminates the need for a higher voltage power supply, allowing for lower voltage applications. Single diodes, on the other hand, are inherently simpler in design and operation and are used to regulate current in common d.c. circuits. The SMAJ4474E3/TR13 is a single diode designed to provide a breakdown voltage of 13 volts with a maximum power dissipation of 500mW.

When the SMAJ4474E3/TR13 is utilized in an a.c. application, it functions as an idealized rectifier, allowing for a current to flow in only one direction. This is due to the non-linearity of the diode as applied to alternating voltage sources, where the diode behaves differently under positive and negative voltages. Under positive voltage, the diode is forward-biased and allows current to flow. When the applied voltage becomes negative, the reverse-biased diode becomes an open circuit and does not allow current flow. In this way, the positively-biased voltage can be rectified and passed onward.

The SMAJ4474E3/TR13 is also utilized in applications where one voltage is supplied but a different voltage needs to be produced. This is accomplished by passing current through the diode and resistance, thus forming a voltage divider. An example of such an application might be the creation of a 1.5volt voltage source from an AA battery whose voltage is lower than 1.5volt. By using the diode and a suitable choice of resistors, the output voltage can be adjusted to the desired level.

The working principle of the SMAJ4474E3/TR13 is also applicable in d.c. circuits. When a current is passed through a diode, a voltage drop is generated across the diode that is proportional to the amount of current that passes through it. This voltage drop can be used to regulate the current flowing in a d.c. circuit and provides a means for controlling the emitted brightness of LEDs or other current-controlled circuits.

The SMAJ4474E3/TR13 is therefore an ideal single diode for both d.c. and a.c. applications. It has the capability to regulate current, provide rectification, or act as a voltage divider. In addition, its breakdown voltage of 13 volts makes it well suited for use in low-voltage applications where a high level of reliability is required.

The specific data is subject to PDF, and the above content is for reference