SMAJ5928E3/TR13

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SMAJ5928E3/TR13 is a single type Zener diode. It is capable to breakdown and regulate about 5.9V with maximum dissipation power of 500mW. This kind of diode can be used in many ways due to its various characteristics and application fields.

Application Field

The most applicable areas of SMGAJ5928E3/TR13 are surge suppression, clipper, wave shaping circuit, free wheel circuits, constant voltage regulator and many others. It is basically used in electronic circuit as to provide electrical isolation, voltage reference and current regulation.

It can be used as a surge protector in consumer electronics. When the voltage exceeds a certain range, the diode will short circuit and protect the device from voltage spike or electrical surges. This kind of diode can also be used as a current regulator. The breakdown voltage and the current value of the diode can be set so that it passes current through it only when the circuit reaches its threshold.

Moreover, the diode can be used for wave shaping, which means that it can pass current through it only when the voltage reaches a certain threshold. This kind of diode can also be used for AC voltage regulation. It can help to control the power supply and protect the circuit from surges and overvoltage.

Working Principle

The working principle of SMGAJ5928E3/TR13 is a blocking type of diode, it can be used in both conduction and non-conduction state even if the voltage across it is zero. This kind of diode has a reverse bias voltage, which means that the diode becomes conductive when the applied voltage exceeds its breakdown voltage. This means that the diode is turned on when the reverse bias voltage applied across it exceeds its breakdown voltage and the diode is turned off when the reverse bias voltage applied across it falls below its breakdown voltage.

The breakdown voltage of SMGAJ5928E3/TR13 varies from 5.9V to 6.1V. The optimum working voltage for these diodes is 5.9V. The power dissipation for these diodes can be as high as 500mW. The temperature coefficient of these diodes is -5mV/°C, which means that the diode\'s breakdown voltage can be affected by its temperature which is why it is essential to use a soldering iron with a low temperature setting when working with this kind of diode.

SMAJ5928E3/TR13 is suitable for use in very high temperature and high voltage environment. This kind of diode is very reliable and offers long service life. It can be used in a wide array of electronic circuits due to its versatile application fields, breakdown voltage and power dissipation.

The specific data is subject to PDF, and the above content is for reference