SMB10J6.0A-E3/52

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SMB10J6.0A-E3/52 is a TVS (Transient Voltage Suppressor) diode designed to protect against destructive voltage transients caused by transient over voltage. The SMB10J6.0A-E3/52 is available in a 2-pin surface-mount configuration and has a low capacitance. It offers a maximum peak pulse current rating of 10A (10/1000µs waveform) and a Peak Pulse Power rating of 600 watts.

SMB10J6.0A-E3/52 TVS diode has both linear and clamping operation, the application field mainly involves data line and power line protection. It not only provides protection against spikes, but can also remove high frequency noise and protect Isolation of the high-frequency signals from cross-wired data and power lines. It is widely used in computers, communication equipment, automotive applications, railroads, electronic industrial control systems and other fields.

The device\'s working principle is V-I clamping. It can clamp voltages during a voltage transient event and limit the voltage on the protected power or signal line to a safe level. Most SMB10J6.0A-E3/52\'s have a breakdown voltage of 6V and a maximum clamping voltage of 10V, which means that any voltage spike in excess of 6V is quickly clamped at 10V before reaching the protected supply or signal line.

During normal operation there is no voltage drop across the device and the protected lines remain freely conductive, but during a transient event the diode starts to conduct which causes a voltage drop and a clamping action. The SMB10J6.0A-E3/52 also offers surge protection against voltage spikes with a fast respond time, allowing for data signals to be unaffected.

SMB10J6.0A-E3/52 is typically mounted directly to the PC board and can be soldered easily in place for reliable protection. The high peak pulse current and power rating of this diode make it suitable for a wide range of applications where the circuit must be protected from destructive voltage transients. The low capacitance ensures that the device does not interfere with any high frequency signals that may be present, allowing the device to perform optimally.

In summary, the SMB10J6.0A-E3/52 is a TVS diode designed to protect against destructive voltage transients caused by transient over voltage. It is available in a 2-pin surface-mount configuration and offers a maximum peak pulse current rating of 10A (10/1000µs waveform) and a Peak Pulse Power rating of 600 watts. It has linear and clamping operation which provides protection against spikes and removes high frequency noise and protects data and power lines. It is widely used in computers, communication equipment, automotive applications, railroads, electronic industrial control systems and other fields.

The specific data is subject to PDF, and the above content is for reference