SMBJ5917A/TR13

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes (also known as rectifier diodes) are semiconductor devices that allow current to flow in one direction and block it in the other direction. Zener diodes are a special type of diode that also permits current to flow in the reverse direction when the voltage is greater than a certain threshold. The SMBJ5917A/TR13 is one such Zener diode, and it is used in a wide range of applications, such as voltage regulation and waveform shaping. In this article, we will discuss the application fields and working principle of the SMBJ5917A/TR13.

The SMBJ5917A/TR13 is a high-speed surface-mount, 600W power Zener diode. It is rated for an operating voltage range between 5.2V and 45V with a maximum surge voltage of up to 200V over a wide temperature range (-55 to +150C). It has a low thermal resistance package and high reliability. This diode is used in a wide range of applications including voltage regulation, power conditioning, short circuit protection, and waveform shaping.

When it comes to voltage regulation, the SMBJ5917A/TR13 can be used to control the output voltage of a system by limiting the voltage that is allowed to flow. This is normally done when the voltage exceeds the maximum specified for the system, and the diode acts as a protective measure by limiting the amount of voltage that is allowed to flow through the system.

The SMBJ5917A/TR13 is also commonly used as a waveform shaping device as it is capable of producing precise waveforms, depending on the type of load that is connected to it. For example, a series connection across the diode and a resistor will produce a triangular waveform, while a parallel connection across the diode and a resistor will produce a square waveform. The precise waveforms that the diode produces make it ideal for use in various types of electronic circuits.

The SMBJ5917A/TR13’s working principle can be explained as follows: when a certain amount of current (above the rated power dissipation) is applied to the diode, it enters a breakdown mode and a large current enters the diode. The resistance of the diode then decreases as the voltage increases, allowing a large amount of current to flow. This current is then used to regulate the voltage within the system, preventing it from exceeding the predetermined maximum.

In conclusion, the SMBJ5917A/TR13 is a high-speed surface-mount, 600W power Zener diode. It is used in a wide range of applications including voltage regulation, power conditioning, short circuit protection, and waveform shaping. Its working principle is based on the breakdown mode, in which a large current is allowed to enter the diode when voltage is applied. This current is then used to regulate the voltage within the system, preventing it from exceeding the predetermined maximum.

The specific data is subject to PDF, and the above content is for reference