SMCJ6.5CA-HRA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS – Diodes refer to transient voltage suppressors, also known as “clamp diodes”. The most common type used is the SMCJ6.5CA-HRA diode, which is a unidirectional device with a built in surge limiting resistor. It is primarily used in the protection of sensitive electronic components and systems from very high voltage transients and transient energy sources.

In comparison to standard rectifier diodes, TVS diodes offer superior, fast response and higher surge protection capability in a much smaller package. The SMCJ6.5CA-HRA diode is designed to handle high peak currents of up to 6.5A and high peak voltages of up to 650V. This makes it ideally suited for the protection of small solid state contactors and actuators.

The working principle of a TVS diode is quite simple. When a high voltage transient occurs, it passes through a circuit of resistors and capacitors to reduce the current that flows through the diode, which in turn limits the power dissipation of the diode. This effect also limits the voltage at which the diode will start to conduct current. A TVS diode is essentially a voltage limiter, designed to protect electronic devices from transient voltages.

One of the most common applications of a TVS diode is in the protection of sensitive electronic components and systems from transient voltages and energy sources. They can also be used in the protection of inductive loads such as motors, solenoids, relays and other similar devices. The SMCJ6.5CA-HRA can also be used in the protection of surge protection systems, particularly in scenarios where the input voltage is subject to large transient changes.

The SMCJ6.5CA-HRA is a unidirectional device with a protective resistor integrated into the package. It is designed to protect sensitive electronic components from high surge currents and peak voltages of up to 650V. The internal device design is such that it limits the amount of current that passes through the diode, thus limiting the power dissipation of the diode and in turn the voltage at which the diode will start to conduct current. The SMCJ6.5CA-HRA is an ideal choice for the protection of small solid state contactors and actuators.

In conclusion, the SMCJ6.5CA-HRA is an ideal choice for those looking for superior surge protection in a small package. It is useful for the protection of sensitive electronics from transients and for the protection of surge protection systems. Its internal design ensures that it limits the amount of current that passes through the diode, thus limiting the power dissipation of the diode and the voltage at which the diode will start to conduct current.

The specific data is subject to PDF, and the above content is for reference