SMDA12-6TR

Current - Peak Pulse (10/1000µs):	1A
Supplier Device Package:	8-SO
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-55°C ~ 125°C (TJ)
Capacitance @ Frequency:	185pF @ 1MHz
Applications:	General Purpose
Power Line Protection:	No
Power - Peak Pulse:	300W
Series:	--
Voltage - Clamping (Max) @ Ipp:	19V
Voltage - Breakdown (Min):	13.3V
Voltage - Reverse Standoff (Typ):	12V (Max)
Unidirectional Channels:	6
Type:	Zener
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS - Diodes SMDA12-6TR Application Field and Working PrinciplesTransient Voltage Suppression diodes (TVS) are specialized devices designed to protect sensitive electronic components and circuits from catastrophic voltage transients caused by electrostatic discharges (ESD), lightning, inductive switching and fault conditions. In order to provide the highest level of protection from these transients, TVS diodes must be optimized for the specific application.The SMDA12-6TR is a TVS Diode with 600 watts of surge power designed to protect circuits and components from transient overvoltages and other common electrical events. The device is made up of two isolated silicon diodes connected in series and each with a maximum surge rating of 600 watts. Its low clamping voltage characteristics ensure a wide range of application scenarios, allowing it to be used in a variety of applications including communications, industrial control and other high peak voltage applications.The SMDA12-6TR has a low capacitance and fast response time, making it well suited for use in data and signal lines. It is typically used to protect devices such as microcontrollers, RF amplifiers and other sensitive electronics from high frequency transients associated with ESD, lightning and inductive switching.The working principle of the SMDA12-6TR is based on the idea that when the voltage input applied to the diode exceeds its breakdown voltage, the current will flow through the diode and be diverted away from the circuit and device that it is protecting. This current causes the diode\'s built-in breakdown voltage to drop, resulting in a clamping action that limits the transient voltage and prevents it from damaging the protected components.When the transient event is over, the diode is quickly restored to its original clamping voltage after the surge has passed. This allows the circuit to continue operating normally without any need for external power.The SMDA12-6TR is designed and performance tested to provide superior protection to a wide range of applications in various industries. It is reliable and easy to install, making it a cost effective solution for any circuit protection needs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description