SMF45AHRQG Circuit Protection

Current - Peak Pulse (10/1000µs):	2.8A
Supplier Device Package:	SOD-123W
Package / Case:	SOD-123W
Mounting Type:	Surface Mount
Operating Temperature:	-55°C ~ 175°C (TJ)
Capacitance @ Frequency:	--
Applications:	Automotive
Power Line Protection:	No
Power - Peak Pulse:	200W
Series:	Automotive, AEC-Q101, SMF
Voltage - Clamping (Max) @ Ipp:	72.7V
Voltage - Breakdown (Min):	50V
Voltage - Reverse Standoff (Typ):	45V
Unidirectional Channels:	1
Type:	Zener
Moisture Sensitivity Level (MSL):	--
Part Status:	Active

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS - Diodes

TVS (transient voltage suppressor) diodes are widely used in many applications to protect sensitive electronic circuits from voltage transients induced by lightning and other sources. TVS diodes are semiconductor devices that absorb large, short-term, high-energy pulses of electrical current, thus protecting the electronic components from damage. The SMF45AHRQG is a type of TVS diode that is designed to protect I/O interfaces against external noise and transient voltage pulses, from lightning and electrostatic discharge (ESD).

Application Field

SMF45AHRQG TVS diodes are typically used in interface protection applications that require fast response time and low clamping voltage. In communications and networking applications, this device effectively eliminates line disturbances by clamping to ground any over-voltage events that may occur. It is also suitable for protection of signals in industrial, commercial and automotive applications.

Working Principle

The SMF45AHRQG works by clamping the voltage below a certain value to protect the vulnerable circuit components. It achieves this by consisting of an anode (positive) and a cathode (negative) and will have a reverse leakage current, which is used to activate the device. When a voltage transient occurs, the reverse leakage current will increase and activate the diode, which then begins to conduct current from the anode to the cathode and the voltage is clamped below a certain voltage level. This ensures that the connected circuit components remain safe and all the electrical signals flowing through the system are not adversely affected.

Advantages

There are several advantages of TVS diodes, such as the SMF45AHRQG, when compared to other transient protection solutions, such as MOVs (Metal Oxide Varistors) or gas discharge tubes (GDTs). Unlike MOVs, TVS devices can respond to much shorter and faster transients, allowing them to provide much better protection in most applications. They are also much smaller in size and have a low capacitance, allowing them to have minimal effect on the signal integrity when installed in high-frequency circuits.

Conclusion

The SMF45AHRQG TVS Diode is a device typically used to protect electronic circuits and equipment from transient voltage, such as lightning strikes and ESD, and is capable of responding much faster than other protection solutions. With its fast response time, low capacitance, and small size, the SMF45AHRQG is an ideal choice for protecting I/O interfaces in communication, industrial, automotive, and other applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description