SMLJ12A

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS - Diodes

Transient voltage suppressors (TVS) are devices primarily used to protect electronic circuits from high-voltage, high-energy transients. TVS diodes provide protection from transients that can be caused by lightning, static electricity, automotive power ports, and power cross transients. The most commonly used type of TVS diodes is the SMT-J12A.

SMLJ12A Application Field and Working Principle

The SMLJ12A is a unidirectional diode designed to limit over-voltage. It is typically used to protect circuits from electrical transients such as lightning and electrostatic discharge (ESD). Its small size allows for use in portable electronics and other applications where space is at a premium.

The SMLJ12A is a 3-terminal device which consists of a diode and a Zener diode in series. The diode is used for conducting surge current, and the Zener diode is used to protect the circuit from high overvoltage. The SMLJ12A is a uni-directional device, so it will only protect from overvoltage in one direction. To protect from overvoltage in both directions, two SMLJ12As must be used in opposite directions.

The SMLJ12A can be used to protect sensitive electronic components, such as microprocessors, power supplies, and connectors. The device is designed to protect sensitive electronics from electrical transients, such as electrostatic discharge (ESD). It is also used to protect against overvoltage conditions, such as voltage spikes caused by lightning or power cross. When an overvoltage condition occurs, the SMLJ12A will limit the voltage level to avoid damaging the protected circuits.

The SMLJ12A has two modes of operation: steady state and transient action. In steady state mode, the SMLJ12A will conduct a very small amount of current, allowing the protected circuit to operate at a slightly lower voltage. In transient action mode, the SMLJ12A will conduct a large amount of current, limiting the voltage to either the “clamping” voltage or the “trigger” voltage. The clamping voltage is usually slightly lower than the trigger voltage.

The SMLJ12A is a reliable device for a wide range of applications. It can be used to protect sensitive electronic components from high-voltage transients, such as lightning struck or ESD. It can also be used to limit the voltage of a power supply, thereby preventing power supply failures. The SMLJ12A is extremely reliable, and is therefore widely used as a TVS diode for a variety of applications.

The specific data is subject to PDF, and the above content is for reference