SN65LVDT125ADBTRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN65LVDT125ADBTRG4 is a voltage-output, differential transformer based linear position sensor that is used to measure linear displacement with a motor shaft, a mechanical arm, or other type of moving component. This device is typically used in industrial robotics, factory process control, and automation systems in general. It is important to note that the device’s performance is largely dependent on installation and operating conditions and must be tuned prior to use to meet the specific requirements of the application. With this in mind, this article will discuss the application field and working principles of the SN65LVDT125ADBTRG4.

As a signal switch, multiplexer or decoder, the SN65LVDT125ADBTRG4 has a number of advantages that make it an ideal choice for a number of applications. For starters, it is a very simple device that requires minimal external components, meaning that it can be used in places where space and cost are a concern. In addition, it offers a high accuracy that is typically within 0.5% of the desired output range. Lastly, the device can be used to measure a variety of displacement ranges while providing a linear voltage output proportional to the linear displacement sensed.

The SN65LVDT125ADBTRG4 is a differential voltage transformer. In other words, its working principle is based on the changes of the mutual inductance between two windings when there is variation in the air gap between them. This device is made up of two primary windings and one secondary winding, all of which are wound on a core. There is also an air gap between the primary and secondary windings. The primary and secondary windings are connected to the ADC converter which is used to convert the physical input into a digital output.

When a linear displacement is sensed, a voltage is applied between the two primary coils, causing the current to flow through them. This current flow creates a flux that creates a magnetic field. This in turn creates an induced voltage in the secondary coils, which is proportional to the displacement that is being sensed. This voltage is then fed into an ADC converter which converts the signal into a digital output which can be read by the microcontroller. Since different displacement ranges can be measured, the ADC converter can be adapted to convert the signal for different ranges.

The SN65LVDT125ADBTRG4 is well-suited for applications where a linear displacement needs to be sensed and measured accurately over a wide range. It is particularly suitable for factory process control and automation systems, where its high accuracy, small size, and simple operation makes it a good choice. With a variety of available displacement ranges, it is also a good choice for a wide range of applications, such as linear actuators, engines, and machine vision systems.

In conclusion, the SN65LVDT125ADBTRG4 is a voltage-output, differential transformer based linear position sensor that has a number of advantages which make it an ideal choice for a number of applications. It is well-suited for applications where a linear displacement needs to be measured accurately over a wide range and can be used in factory process control and automation systems, as well as a variety of other applications. With its differential voltage transformer operating principle and its high accuracy, the SN65LVDT125ADBTRG4 is an excellent choice for a variety of linear position sensing applications.

The specific data is subject to PDF, and the above content is for reference