SN74AHC123APWR Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Logic multivibrators are electronic circuits which function as (usually) two-state devices. They consist of two amplifying elements which are linked by some form of feedback. Their operation is based on the principle of positive feedback. In other words, the output of one amplifying element is connected to the input of the other and the process is repeated until a stable state is reached. A fundamental characteristic of a multivibrator is its ability to switch between two stable states at a predetermined frequency.

The SN74AHC123APWR is a type of logic multivibrator which is suitable for use in a variety of applications. It is a dual-input positive-edge triggered dual-resistor four-bit monostable. The device features two independent eight-stage triggering stages, two programmable outputs, and two outputs. The two programmable outputs are used to control the gate times and output pulse ulvage.--

The monostable multivibrator can be used as a timer, a frequency divider, an over-voltage protection circuit, an interval timer, and a reset circuit. The SN74AHC123APWR is an ideal choice for applications where ultra-low power consumption is desired. It consumes less than 50nA at 5V supply voltage and the power consumption is reduced even further when the internal reset circuit is used.

The SN74AHC123APWR operates on a single supply voltage of 2-6V. The device features two independent eight-stage triggering stages which are designed to be triggered by a positive-edge input pulse. The rising edge of the control signal causes the two transistors connected to the positive input to switch states. This causes the device to enter its monostable state where it will stay until the reset signal is given.

The two outputs of the device are designed to be in opposite logic states while the device is in its active state. When the reset signal is given the outputs will switch back to their original logic states. The device also features an internal turnoff function which prevents the outputs from being driven for more than the programmed number of clock cycles.

The outputs of the SN74AHC123APWR can also be used to drive external logic devices. When the external logic device is driven by a SN74AHC123APWR, the device will act as a bi-stable flip-flop and the logic states of the outputs will not switch until the internal logic state of the SN74AHC123APWR changes. This feature makes the SN74AHC123APWR an ideal choice for applications that require rapid switching between different logic states.

The SN74AHC123APWR is an excellent choice for applications requiring extremely low power consumption and switching between two stable logic states. The device features two independent eight-stage triggering stages, two programmable outputs, and two outputs. This makes it an ideal choice for use in applications such as frequency dividers, interval timers, over-voltage protection circuits, and reset circuits.

The specific data is subject to PDF, and the above content is for reference