Series:	74ALS
Packaging:	Tube
Part Status:	Active
Logic Type:	D-Type Transparent Latch
Circuit:	8:8
Output Type:	Tri-State
Voltage - Supply:	4.5 V ~ 5.5 V
Independent Circuits:	1
Delay Time - Propagation:	6ns
Current - Output High, Low:	2.6mA, 24mA
Operating Temperature:	0°C ~ 70°C
Mounting Type:	Through Hole
Package / Case:	20-DIP (0.300", 7.62mm)
Supplier Device Package:	20-PDIP
Base Part Number:	74ALS373

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

The SN74ALS373AN is a type of logic-latch integrated circuit (IC). It is composed of eight identical latches and is a versatile device that can be used in a variety of applications. This article will discuss the various application fields of the SN74ALS373AN, as well as its working principle.

Applications of the SN74ALS373AN

The SN74ALS373AN has a variety of uses in both digital and analog designs. It can be used as an address latches, data latches and shift registers in digital designs. In analog designs, it can be used as an analog multiplier and an analog multiplier/divider, among other applications.The SN74ALS373AN is also useful in the transfer of data from a slower device to one with a faster clock rate. It can be used to bridge the gap between two clocks of different speeds, allowing for the transfer of the data.For example, the SN74ALS373AN can be used to transfer data from a sensor with a 10 kHz clock rate to a controller with a 20 kHz clock rate. The SN74ALS373AN will allow for the data to be transferred from the slower to the faster clock rates, allowing for a high speed transfer as compared to traditional methods.

Working Principle of the SN74ALS373AN

The SN74ALS373AN is a logic-latch IC that uses two types of signals: the enable (E) and the data (D) signals. The E signal acts as the control signal to the latch; when it is set to high, the data on the D signal is stored. When the E signal is set to low, the data on the D signal is reset.The SN74ALS373AN can also be used as an address latch, where the E signal is used to latch the data on the D signal, allowing for the address of each latch to be accessed when the E signal is set to low.

Conclusion

The SN74ALS373AN is a versatile type of logic-latch IC that can be used in a variety of applications in both digital and analog designs. It can be used as an address latch, as a data latch, and as a shift register, as well as an analog multiplier/divider in analog designs. Furthermore, it can also be used to bridge the gap between two different clock speeds for the transfer of data. It works by using two signals, the enable and the data signals, to either store the data on the D signal when the E signal is set to high, or reset the data on the D signal when the E signal is set to low.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description