SN74AS161DRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SN74AS161DRG4 is a 16-bit ripple counter composed of circuits that can be connected in series to count input pulses, and is therefore considered a type of counter or divider. It belongs to the 74AS range of digital counters that are designed and manufactured by the semiconductor manufacturer Texas Instruments in its wide range of integrated circuits.

A SN74AS161DRG4 counter is one of the simplest logic circuits and operates on a basic principle: when an input pulse is fed into one of the “bit” lines, the previous bit will be incremented by one. Thus, if 4 pulses have been fed into the SN74AS161DRG4 counter and the starting bit is “0”, then the output of the counter will be “0100”. The circuit is capable of counting up to 16 bits.

The main applications for the SN74AS161DRG4 are in frequency division, timing and sequential logic systems in which very precise counting and timing is required. It is commonly used in industrial and automotive processing systems, to control the passing of signals from sensor devices and to accurately measure periods of time. The SN74AS161DRG4 can also be used as an address generator in memory systems that employ multiple-bit arithmetics, as it keeps accurate track of the addresses of each locations.

In addition to its use in industrial and automotive processing systems, the SN74AS161DRG4 may also be utilized in computing equipment, including large, distributed control systems as well as smaller computer systems, such as personal computers, handheld computers and small embedded systems. Lastly, the logic circuit can be used in low-power embedded systems applications, such as life support and automotive systems.

The SN74AS161DRG4 is an integrated circuit that is made up of five functional components which are the three registers, the logic section and the count/shift register. The main configuration of the chip is made up of three 16-bit registers (F1, F2 and F3) with three 8-bit words that are capable of being loaded independently with values up to 65,535 (16-bit maximum). This arrangement is its main characteristic, as it enables the user to program the chip for various functions like counting, shift and rate services.

The logic section is responsible for the control of how the counts are carried out. It also sets the loading of the 8-bit words in the registers, enabling the user to control if a word is to be incremented, decremented, held or loaded; this is done by means of control signals.

The count/shift register controls the flow of data within the chip. It contains eight 8-bit bidirectional data lines for the registers and two 8-bit bidirectional data lines for the logic section, which can be used to set the programmable logic of the SN74AS161DRG4. Additionally, two clock inputs at the start and end of the cycle respectively can be use to control the counting operations.

In conclusion, the SN74AS161DRG4 is a 16-bit ripple counter that is used in a variety of applications, including industrial and automotive processing systems, computing equipment, and low-power embedded systems. Its use of three 16-bit registers, combined with a logic section and a count/shift register, enables it to be programmed for various functions, such as counting, shift and rate services.

The specific data is subject to PDF, and the above content is for reference