SN74AS573ADWRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74AS573ADWRG4 is a Noval Logic Latches semiconductor device with configurable high-level output that can quickly transition from set to reset. It includes four master-slave flip-flops capable of storing four bits of data. This flip-flop can operate at levels of 5 V and can operate over the temperature range of -40 to 85 °C.

The SN74AS573ADWRG4 can be used in applications requiring fast register access and synchronous or asynchronous input/output controls. When used as transition registers, these four flip-flops can serve as a single 16-bit register with 16- or 8-bit decoding and sequencing. Due to its advanced 4-bit configuration and its enhanced circuitry, thisSN74AS573ADWRG4 device is particularly suitable for use in memory banks and data acquisition systems.

The SN74AS573ADWRG4 takes input from the data from the data lines D0-D3 and sends it to the internal flip-flops. It then stores the data in the flip-flops until a signal is received from the clock signal line. When the clock signal then activates, the data signal stored in the flip-flops will then be sent through the outputs, Q0-Q3. The SN74AS573ADWRG4 is a gated flip-flop, meaning it requires a separate enable signal for controlling the output and for a valid data transfer.

The SN74AS573ADWRG4 contains four two-input AND gates, two two-input OR gates and four master-slave type flip-flops. The two OR gates are used as the logic gate to control the data inputs, while the four flip-flops consist of two identical logic subcircuits that can be preset or reset with external enable logic signals. As mentioned, the enable logic signal must be applied to all three enable inputs, i.e. G0, G1, and G2. When the enable signal is low, the output is disabled and the data is not propagated, but when the enable signal is high, the data is propagated.

The SN74AS573ADWRG4 also includes external control pins for latching, resetting and presetting the registers. The LATCH CONTROL pin is an active low input that, when in the low logic state, will latch the data in the internal flip-flops. The PRESET CONTROL and RESET CONTROL pins are active low inputs that will preset or reset the flip-flops, respectively. When either of these controls are in the low logic state, the flip-flops will be preset or reset.

The SN74AS573ADWRG4 is a highly configurable, multi-function device combining the features of gated latch and D-type flip-flops. It can be used in a variety of applications including register access, data acquisition systems, memory banks, and more. It allows for storing up to four bits of data and quickly and easily transitioning from set to reset as needed.

The specific data is subject to PDF, and the above content is for reference