SN74CBTLV3125DGVR

Series:	74CBTLV
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	Bus Switch
Circuit:	1 x 1:1
Independent Circuits:	4
Current - Output High, Low:	--
Voltage Supply Source:	Single Supply
Voltage - Supply:	2.3 V ~ 3.6 V
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	14-TFSOP (0.173", 4.40mm Width)
Supplier Device Package:	14-TVSOP
Base Part Number:	74CBTLV3125

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74CBTLV3125DGVR IC is a member of Texas Instruments\' family of low-voltage, low-power, high-speed logic signal switches, multiplexers, and decoders. The SN74CBTLV3125DGVR is a dual 4-channel, bidirectional, voltage-level translator. The SN74CBTLV3125DGVR uses voltage translation to convert differential logic levels, logic thresholds, and drive strengths between two different logic families.The SN74CBTLV3125DGVR is designed for applications that require maximum data rate and the ability to interface two logic families with different voltage levels. The device has FET input and output switches for improved off isolation and enhanced resistance to electrostatic discharge (ESD). Its output voltage levels are compatible with any TTL, CMOS, and ECL family. In addition, the device is ideal for mixed-mode applications that require high speed switching.The SN74CBTLV3125DGVR consists of two 4-channel, bidirectional voltage-level translators. Each translator has input-signal control, data enable (shown as DE1 and DE2 pins), and four bidirectional channels. The SN74CBTLV3125DGVR is specified in the commercial temperature range and is available in several packages, including 24-pin N-channel thin quad flatpack (TQFP) and 24-pin plastic dual-in-line packages.The SN74CBTLV3125DGVR is designed for applications with power supply voltage from 3.0V to 3.6V and can provide up to 400Mbps data rate. It supports two logic families, LVCMOS and LVTTL, with an output voltage range of 1.8V to 3.6V. The SN74CBTLV3125DGVR is designed to operate from a single 3.3V supply, and the input voltage range is from 0.8V to 3.6V.The main features of the SN74CBTLV3125DGVR devices include low voltage, low power, and a high-speed logic-signal switch, multiplexer and decoder. The SN74CBTLV3125DGVR is a low-voltage device that has a power efficiency that enables high speed switching operations and a wide voltage range up to 3.6V. It also features input-control protection and outputs that can be set to 1.8V or 3.3V logic family thresholds.The SN74CBTLV3125DGVR is suitable for high speed and power sensitive applications such as video, imaging, and memory, and is suitable for use in a variety of logic-signal switching, multiplexing, and decoding applications. These include, but are not limited to, EEPROM/Flash memory, broadband and subscriber network data, video processing, DTV, and high-speed communication.The SN74CBTLV3125DGVR is designed to switch between high-speed logic families and provides data isolation between bus signals with a power efficiency of up to 400 Mbps. It allows for low-power operation and is optimized for a variety of logic-signal switching, multiplexing, and decoding applications. Since the device is designed to use a single supply voltage, it is ideal for applications that require high-speed switching between multiple logic families and different voltage levels.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description