SN74F2373NG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Latches are devices that are used to store a bit of information temporarily on a digital circuit. The SN74F2373NG4 is a type of latch manufactured by Texas Instruments and it is used in many applications. The SN74F2373NG4 is a dual J-K negative-edge-triggered flip-flop latch that is used to isolate digital signals and allow them to be independently triggered. This chip is often used in digital logic circuit designs to provide digital isolation, synchronization and data buffering.

The SN74F2373NG4 consists of two individual latches that are controlled by a single clock input. The latch inputs are connected to both the clock signal and the data signal that is to be accepted and held. A rising edge of the clock signal will trigger a data capture and a falling edge of the clock signal will cause the data to be accepted and held by the latch. One of the latch’s outputs will remain in the high state and the output at the other will not switch state until the data has been held long enough for the latch to accept the data.

The SN74F2373NG4 is used in a variety of applications due to its small size and low power consumption. These include digital clock circuits, memory systems that require low levels of power, digital timing and control circuits, data buffering, signal synchronization, signal isolation, and logic buffering. Other applications include bus switch applications, signal switching between devices with different voltage levels and power levels, as well as vector-matrix switching.

The SN74F2373NG4 is available in various packages such as SOP-8, SOIC-14, PDIP-16, and TSSOP-16. The packages make it easy to interface the latch with other components without soldering or other hardware modifications. The latch is also available in both commercial and industrial temperature ranges.

The SN74F2373NG4 is relatively easy to use as it has only two inputs and there is no need to connect additional external components. The chip can be powered using a single 5 V power supply. This makes it quite suitable for high performance applications where there is a need to minimize power consumption and space on the circuit board.

In conclusion, the SN74F2373NG4 is a dual J-K negative-edge triggered flip-flop latch with a variety of applications such as digital clocks, memory systems, control circuits, signal isolation, and data buffering. It is also available in various packages and can be powered by a single 5 V power supply. Its small size, low power consumption and reliable performance makes it a great choice for high performance applications.

The specific data is subject to PDF, and the above content is for reference