SN74HC191DG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74HC191DG4 is a four-bit Synchronous Up/Down Counter with carry output. It is a synchronous counter, meaning that the transitions of the output bits are synchronous with the transitions of a clock signal. The SN74HC191DG4 is designed to address a wide range of applications from simple frequency counting to complex timing control.

The SN74HC191DG4 can be used in various applications, such as frequency counters, clock dividers, and rate selectors. As a frequency counter, the SN74HC191DG4 can be used to count the number of pulses within a given time period. As a clock divider circuit, the SN74HC191DG4 can be used to divide a given frequency by a specific number. As a rate selector circuit, the SN74HC191DG4 can be used to select different frequencies by using the output of the counter as a select line.

The SN74HC191DG4 consists of four-bit stages, each providing a logic output. It also has a carry output which signals overflow in the count sequence. The carry output of the SN74HC191DG4 is used to propagate the carry to the next higher stage, allowing for larger count sequences. The SN74HC191DG4 also has four control inputs: Count Enable (CE), Up/Down (UD), Interval Reset (IR), and Clock Input (CP).

The Count Enable (CE) is used for controlling the counter and is usually connected to a high signal. When CE is low, all the outputs are forced to a low signal and the counter is disabled. The Up/Down (UD) signal controls the count sequence of the SN74HC191DG4. When UD is low, the counter counts up and when UD is high, the counter counts down. The Interval Reset (IR) is used to reset the counter before count start. When IR is low, all the counter outputs are reset to logic low. Lastly, the Clock Input (CP) is used to synchronize the count sequence.

In summary, the SN74HC191DG4 is a four-bit Synchronous Up/Down Counter with carry output, designed to address a wide range of applications from simple frequency counting to complex timing control. It is suitable for applications such as frequency counters, clock dividers, and rate selectors. Applications such as these require signals that control counting direction and resetting, allowing for larger count sequences.

The specific data is subject to PDF, and the above content is for reference