SN74HC191N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74HC191N is a type of 4-bit synchronous binary up/down counter which belongs to the logic counters, dividers category. It uses a synchronous design which allows for flexibility as it can count-up, count-down, and be preset with an initial value. The SN74HC191N is controlled by three inputs, two of which are active-high, and one is asynchronous active-low reset.

The SN74HC191N has four outputs (Q0-Q3) making it a 4-bit counter, which means it can count from 0 to 15. In counting mode, each output will sequentially assume a logic high state upon the positive edge of the clock signal, and the output sequence is determined by the count-up/-down input. The clock signal must include a low-level set time for proper operation. The preset inputs are multiplexed to both the count-up and count-down inputs. Whenever the counter enters the preset state, the output will assume the levels dictated by the preset inputs.

The SN74HC191N is a very robust and versatile counter, as it allows for both up and down counting, as well as preset capability. It can be used for a variety of applications since it occupies very little board space and operates in a wide power-supply range using standard 5V logic. It is used in automotive, medical, industrial control, communications, and other embedded systems applications.

The SN74HC191N is a type of synchronous 4-bit counter, which means that its counting rate is set by the clock frequency. The signal which triggers the output pulses is applied to the clock input and this causes the counting sequence to take place. The counter will start to count up or down, depending on the inputs, when the input clock signal goes HIGH at the positive edge. The counter can be reset to 0 and start counting again by applying a LOW signal to the asynchronous reset input. The reset operation also sets all outputs to their low states and is independent of any count-up/-down input.

The SN74HC191N is a very popular counter device and is known for its reliability and durability. The device is used in automotive and embedded systems, because of its small size, wide operating temperature range and wide power-supply range. It is also used for long time programs that require synchronization and accurate timing. The inputs and outputs are all capable of 5V logic, except for the asynchronous reset input, which has an absolute maximum rating of 6V.

The SN74HC191N is an extremely useful and versatile device that is used in a wide range of applications. It allows for counting up and down, and can also be preset with an initial value. Its synchronous design ensures accuracy and reliability and its small size makes it easy to integrate into any system. With its robust construction and wide operating range, the SN74HC191N is sure to be a popular choice for many designs.

The specific data is subject to PDF, and the above content is for reference