SN74HC193PWT

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74HC193PWT is a dual 4-bit binary up/down counter that is commonly used in logic applications. It has two distinct operating modes: an asynchronous clear mode, and an asynchronous parallel load mode. Both of these modes are available through separate dedicated system pins. The SN74HC193PWT can be used as an up/down counter, as a divide by two binary counter, or as a divide-by-n modulo counter when connected in cascading mode. This device is capable of implementing mod 2 and mod 5 counting when counting in up/down or binary parallel-load mode.

The SN74HC193PWT is designed to be an ideal counter in both noise immunity and clock frequency. It has a relatively low propagation delay, making it suitable for use in high frequency applications. Because of its low pin-count (14 pins), small size, and ESD protection, it is considered ideal for integration in complex logic applications. This device is particularly well suited for data transmission, frequency-division multiplexing, and communications applications.

The SN74HC193PWT is a synchronous counter, which means that all changes in the output states are clocked with a single clock signal. Therefore, the output is only updated after the clock has cycled through the counter and only when a specific count has been achieved. This improves the noise immunity and reduces the glitches that would otherwise be present in the logic states if the counter was operated asynchronously.

The SN74HC193PWT binary counter also has an asynchronous clear mode, which drives all outputs low when asserted. This mode is ideal for resetting the counter to a known state and is especially useful when used with other counters, allowing them to be flexibly connected in a chain. In parallel load mode, the SN74HC193PWT allows loading the count register simultaneously with all data inputs. This mode provides fast setup of the counter in a single clock cycle.

The SN74HC193PWT is designed to be suitable for interface applications. Its rugged logic interface capability and wide operating range makes it compatible with most logic families. The device requires very low current and voltage ratings, making it highly efficient and power-saving, ideal for battery-operated applications. The output enable pin can be used to access the preset value of the counter register, allowing for flexible connection and operation of multiple counter devices.

The SN74HC193PWT is ideal for use in counters, dividers, and other logic applications that require both synchronization and up/down counting using a single clock signal. With its wide range of features and versatile applications, it is an ideal choice for embedded digital logic applications.

The specific data is subject to PDF, and the above content is for reference