SN74HC573AQDWRQ1 Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74HC573AQDWRQ1 is a part of the family of logic-latches that have 8-bit D-type flip-flops with latched outputs and asynchronous clear, and is typically used in a wide range of circuits where high rates of data are exchanged.

The SN74HC573AQDWRQ1 provides 8 bits of buffered storage for an input signal, where each bit of the output corresponds to one of the input signals. The outputs of the latch are latched, meaning that an output signal remains active after the input data has been switched off. The latch also has an asynchronous clear input which allows it to be reset to zero. Each of the 8 output bits can be independently reset.

The SN74HC573AQDWRQ1 is mainly used in applications where a signal delay is needed, such as memory-embedded systems, 4-phase stepper motor control, CPLD/FPGA designs and battery-powered systems. It is also used in synchronous systems, including those that require periodic data transfer. The latch can also be used in systems that require synchronization between the receiving and transmitting ends of a data transaction, as well as systems in which multiple data signals must be sequenced.

The SN74HC573AQDWRQ1 uses a single supply voltage, which makes it suitable for applications where power consumption must be kept to a minimum. It has an operating temperature range of -40°C to 85°C, making it suitable for use in various applications including automotive and aerospace applications. The latch has a propagation delay of 25-ns, which makes it suitable for applications requiring fast response times.

In terms of working principles, the SN74HC573AQDWRQ1 basic principle is to latch the data signals, allowing them to pass from their input lines to the output lines, where the data is obtainable by the user. The latch is designed to accuratly store the data for subsequent times when it might be needed. The inputs for the latch are normally in the low state, but when the D input is activated, the Q output will be set to the data that is located on the D input. The output will remain in this state even after the D input is deactivated, until the asynchronous clear input is activated.

The SN74HC573AQDWRQ1 has a wide range of application applications, including memory-embedded systems, 4-phase stepper motor control, CPLD/FPGA designs, battery-powered systems, and synchronous systems. It is an ideal choice for applications where a signal delay is needed, or when multiple data signals must be sequenced and synchronized. Therefore, the SN74HC573AQDWRQ1 is an essential component of many circuit designs.

The specific data is subject to PDF, and the above content is for reference