SN74LS161ANG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74LS161ANG4 is an electronic device used to count, divide or synchronize digital signals. It is a 16-bit synchronous binary latch or counter chip from the LS family of logic integrated circuits (ICs). It is an enhanced version of the SN74LS160A type of logic IC, which was introduced by Texas Instruments in 1973. This logic device can be used in many applications, including frequency dividers, digital multimeters, logic probes, and frequency counters.

The SN74LS161ANG4 is a synchronous binary counter with four outputs, A, B, C and D. Each output is a single bit, and each can be used as an input for forming larger digital words. It has two clock inputs, Clock A and Clock B. Clock A is used to increment the data bits in the counter after it is clocked, while Clock B is used to reset the counter back to zero. It also has two extra inputs, a reset (R) and a carry-in (CI). The reset input controls the counter to be set to zero upon the assertion of a high logic level. The carry-in input allows the current count to be incremented by more than one bit.

The SN74LS161ANG4 is designed to work with such logic families as TTL (Transistor-Transistor Logic) and CMOS (Complementary Metal Oxide Semiconductor). It is available in a 14-pin dual in-line package (DIP), with pin-outs that are compatible with other typical counters. The device has an operating temperature range from -55 to +125 °C and can operate on a power supply voltage range from 4.4V to 5.4V. It is also highly reliable and can withstand up to 100,000 cycles without degradation in performance.

The SN74LS161ANG4 is primarily used in applications that require counters, dividers, and synchronizers. In a frequency dividing application, for example, the SN74LS161ANG4 can be used to divide a given frequency by two, four, or eight. The frequency can be divided in several ways, depending on the connections made to the output pins (A, B, C, and D). For example, if only A and B are connected, the frequency is divided by two; if A, B, and C are connected, the frequency is divided by four; if all A, B, C and D are connected, the frequency is divided by eight.

In a digital-to-analog conversion application, the SN74LS161ANG4 can be used to synchronize the output voltage to the clock frequency. This is done by connecting a resistor and a capacitor to the output of the device, and then applying a varying voltage to the inputs of the chip. The resistor and capacitor will work together to form a low-pass filter between the output and the voltage applied to the outputs. This allows the output of the SN74LS161ANG4 to produce an analog waveform that is synchronized with the clock signals.

The SN74LS161ANG4 is a versatile and reliable device that can be used in many different applications where counters, dividers, and synchronizers are needed. Its simplicity, reliability, and compatibility with the logic families of TTL and CMOS make it an ideal choice for many digital system applications. With its wide voltage range, temperature range, and long-term reliability, the SN74LS161ANG4 is a great choice for a variety of applications.

The specific data is subject to PDF, and the above content is for reference