SN74LS193N

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A SN74LS193N is an integrated circuit device consisting of a four stage binary ripple counter and an oscillator. It is a member of the 74LSxx series, which are integrated circuits characterized by their low power consumption and high speed operation, making them ideal in applications that require minimal power consumption or faster operation. SN74LS193N is a dual-component device with an oscillator driving a four-stage binary ripple counter, making it widely used in applications such as counting frequency and timing cycles.

The SN74LS193N integrated circuit operates on a single +5V power supply, has four outputs - QA, QB, QC, and QD - and two reset inputs -- master reset (MR) and clear (CLR). Its low threshold voltage allows it to be directly driven by TTL (Transistor-Transistor-Logic) levels. Its wide operating temperature range and low power consumption make it suitable for a variety of industrial and consumer applications.

The SN74LS193N operates on a two-transistor-cell Power Dissipation Switch that can be set to output logic levels of either high (1) or low (0). When the counter reaches its maximum count, the QD output produces a high signal level and the oscillator stops. Clearing of the SN74LS193N is triggered by either a master reset or the clear pin, and both low level inputs reset the counter to zero. Once the task is complete, the counter start count from zero again.

The SN74LS193N logic counter is required to be driven by an external clock signal, and the aforementioned procedure must be repeated in cycles to generate a regular sequence of outputs. This repetitive cycle is extremely useful in applications such as frequency counters and timers commonly used in consumer electronic devices.

Since its introduction, the SN74LS193N has been used in countless consumer and industrial applications. From counting frequency and timing cycles to generating regular sequence of outputs, it has become the preferred choice of many manufacturers and engineers. From automotive, aerospace and entertainment to military, security and healthcare applications, the SN74LS193N has become one of the most widely used integrated circuits of its kind.

In summary, the SN74LS193N is a dual-component integrated circuit that can be used for frequency counting and timing cycles with its oscillator and four-stage binary ripple counter. It operates on a single + 5V power supply and two reset inputs, making it highly efficient in applications where low power consumption or faster operation are needed. Its wide operating temperature range and low power consumption make it suitable for a variety of industrial and consumer applications.

The specific data is subject to PDF, and the above content is for reference