SN74LS93DG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74LS93DG4 is a member of the long-running franchise of Texas Instruments’ (TI) SN74LS logic family of integrated circuits. It is a 4-bit counter chip which is used to count up or down, depending on the applied inputs. In the modern electronic applications, logic circuits are of the utmost importance. From the simplest of schematics to the most complex of systems, logic ICs are needed everywhere.

The SN74LS93DG4 belongs to the logic family of devices and falls under the category of counters, dividers, and shift registers. It is a synchronous 4-bit counter which means that it uses a system clock signal to determine when to count up or down the applied input. As such, the chip is relatively simple to use and requires only a few external components in order to be functional.

At the heart of the SN74LS93DG4 IC, there are two 4-bit synchronous up/down counters. Each counter is an independent chain of flip-flops, each with their own associated control signals and outputs. The chain is connected in a loop and the output of the first flip-flop connects to the input of the last one. Upon being triggered by the system clock, each flip-flop will update its state according to the applied input. The output of each flip-flop is labeled QA, QB, QC, and QD.

The SN74LS93DG4 has three mode of operation which is selectable through the use of the Mode Select (M0, M1) pins. These operation modes include a synchronous up and down count as well as a single up/down count. There is also a reset pin which is used to reset the device to its initial (default) value.

In conclusion, the SN74LS93DG4 is a 4-bit synchronous up/down counter IC which is an essential component for many electronic applications. It falls into the logic family of devices and is specifically part of the counters and dividers family. It has several input and output pins and is relatively simple to use with the help of only a few external components. Attaching to a system clock is all that is necessary in order to get the device to perform its job.

The specific data is subject to PDF, and the above content is for reference