SN74LVC16373ADGGR Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN74LVC16373ADGGR is a 1-of-16 data selector/multiplexer. It is part of the Texas Instruments TTL-based LVC family of very low-power, high-performance CMOS devices. The SN74LVC16373ADGGR is a member of the Texas Instruments high-speed CMOS Logic family. It is capable of operation up to 100 MHz, and is designed to operate in either high-speed, low-power or low-power dissipation modes. The SN74LVC16373ADGGR features an internal data latch, three-state outputs, and bus hold, which makes it ideal for use in multiplexing and data select applications.

The SN74LVC16373ADGGR has two types of inputs: data inputs and select inputs. Data inputs are provided in both true and complementary formats, and select inputs are available in both digital and analog formats. Data inputs are used to select the logic level for the data to be output. Select inputs are used to determine which data input is to be outputted. All inputs are fully protected from damage due to voltages exceeding the voltage ratings of the device.

The SN74LVC16373ADGGR is an ideal device for applications requiring digital data selection and multiplexing. It has a high-speed CMOS logic family operation, making it ideal for applications requiring a high degree of speed and accuracy. The SN74LVC16373ADGGR can be used in many applications, including data selection, multiplexing, and shifting, as well as in logic-level conversion, signal conditioning and signal synthesizing. It is especially useful in the areas of automotive, industrial, and medical device design.

The SN74LVC16373ADGGR\'s working principle is based on two types of flip-flops, namely D and T latches. The D-latch data path is controlled by the D input and the T latch data path is controlled by the T input. The first latch (the D latch) is the logic circuit that stores data and is output upon receiving a clock signal. This type of latch is usually implemented with a combinational logic circuit.

The second latch (the T latch) is a device that is used to store the data that has already been stored by the D latch. This particular latch is a tristate latch, which means that it has three different states: 0, 1, and clear. The T latch serves as a storage element to store the data supplied by the D latch when the T input goes low. The T latch holds the data until a new clock cycle is applied.

The SN74LVC16373ADGGR has two select inputs which are used to select which data input is to be outputted. The A/B select input is an active low enable/disable input which allows or disables either input A or B from becoming an output, depending on the logic state of the D input. The G1/G2 select input is an active low enable/ disable input which allows or disables the output from going low.

The SN74LVC16373ADGGR has two outputs, the 1-of-16 Multiplexed Output (MO) and Tri-State Output (TSO), both of which are active low, three-state outputs. The MO output is the multiplexed output of the latch and can be used to control any type of digital logic. The TSO output is used to provide the tri-state capability of the latch. This output can be used to hold the logic state of the device while the device is powered down.

The SN74LVC16373ADGGR can be used in a wide variety of applications including data selection, multiplexing and shifting, as well as in logic-level conversion, signal conditioning, and signal synthesizing. This device is also especially useful in the areas of automotive, industrial, and medical device design. It provides high-speed operation, low-power consumption, and high-speed multiplexing for data and select inputs.

The specific data is subject to PDF, and the above content is for reference