SN74LVC1G66DBVRG4

Switch Time (Ton, Toff) (Max):	4.2ns, 5ns
Base Part Number:	SN74LVC1G66
Supplier Device Package:	SOT-23-5
Package / Case:	SC-74A, SOT-753
Operating Temperature:	-40°C ~ 85°C (TA)
Crosstalk:	--
Current - Leakage (IS(off)) (Max):	100nA
Channel Capacitance (CS(off), CD(off)):	6pF
Charge Injection:	--
-3db Bandwidth:	300MHz
Series:	--
Voltage - Supply, Dual (V±):	--
Voltage - Supply, Single (V+):	1.65 V ~ 5.5 V
Channel-to-Channel Matching (ΔRon):	--
On-State Resistance (Max):	10 Ohm
Number of Circuits:	1
Multiplexer/Demultiplexer Circuit:	1:1
Switch Circuit:	SPST - NO
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SN74LVC1G66DBVRG4 is classified as an interface analog switch, multiplexer, demultiplexer device that combines the normal non-inverting schmitt trigger with the analog switch. This device is composed of a single binary inverter and multiple single-pole double throw switch elements in a single package. The primary application field of the SN74LVC1G66DBVRG4 is in sampling circuits and multiplexer/demultiplexer operations. Sampling circuits are used for signal conditioning and signal data adaptation. They are necessary for preserving the upper signal frequency ranges. For example, when the starting point of the switch is the high frequency signal, the input signal crest would be distorted. The data can then be sampled via a sample and hold circuit using the SN74LVC1G66DBVRG4, and then re-clocked to the same frequency before sending it to the next stage. This allows for the data to travel at an intended speed and clarity. Similarly, the SN74LVC1G66DBVRG4 is a suitable device for multiplexers and demultiplexers. Multiplexers are used in communications to selectively transfer data between two or more inputs and one output. This operation is used mainly in applications where multiple signals are required to be gated together and then transmitted in parallel. Demultiplexers are designed to gate a single input to multiple outputs, which is mainly used in applications where multiple signals need to be sent to different destinations but are sourced from the same input. The working principle of the SN74LVC1G66DBVRG4 is relatively simple and straightforward. The binary inverter is used to convert the incoming signal from one logic state to the other. As such, it can accept CMOS, and TTL level logic signals and then route them according to the input voltage. The multiple switches act as switches to directly connect the input to the output, allowing an efficient and smooth transmission of signals while reducing switching noise. The SN74LVC1G66DBVRG4 has an input high voltage range of 3V-5.5V, an input low voltage range of 0.8V-2V, and an output high voltage range of 4.1V-5.5V. It typically operates in the temperature range of -40℃ to 125℃, and with a maximum supply voltage of 5.5V. Since the supply voltage only has to be that high, it makes the SN74LVC1G66DBVRG4 suitable for use in low power applications. Overall, the SN74LVC1G66DBVRG4 can be classified as an interface analog switch, multiplexer, demultiplexer device that is suitable for various applications where multiple signals need to be efficiently and accurately routed. Its low power requirements and wide operating temperature range make it an ideal device for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description