SN74LVC373ANSR Integrated Circuits (ICs)

Series:	74LVC
Packaging:	Tape & Reel (TR)
Part Status:	Active
Logic Type:	D-Type Transparent Latch
Circuit:	8:8
Output Type:	Tri-State
Voltage - Supply:	1.65 V ~ 3.6 V
Independent Circuits:	1
Delay Time - Propagation:	1.5ns
Current - Output High, Low:	24mA, 24mA
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Surface Mount
Package / Case:	20-SOIC (0.209", 5.30mm Width)
Supplier Device Package:	20-SO
Base Part Number:	74LVC373

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction:

SN74LVC373ANSR is a high-speed, low-power logic chip which belongs to the 74LVC series. It is a type of latch and designed primarily for low voltage (1.8V-3.6V) applications. SN74LVC373ANSR provides a flexible architecture that can be used in many applications. It contains four 3-State Inputs and eight 3-State Outputs which can be used to enhance and customize designs.

Application Field:

SN74LVC373ANSR can be commonly found in consumer electronics, medical equipment, digital systems, and automotive systems. SN74LVC373ANSR is used for digital logic applications, signal transmission systems and signal control systems. It can be used in the signal conditioning circuits of audio systems and data acquisition systems, as well as in servo systems and pulse motor control systems. SN74LVC373ANSR is suitable for a variety of applications that require multiplexing, and can be used to eliminate a large number of design and development demands. It is widely adopted in these application fields because of its ability to reduce the number of I/O pins/ports, simplify circuit design and reduce development cost.

Working Principle:

SN74LVC373ANSR is operated by applying two power supplies, VCC and GND. When the chip is powered, the inputted data initiates the latch and gets stored in the flip flop. The stored data can be retained in the flip flop even when the power is removed. The chip contains four 3-State Inputs which are used to control the loading of data into the latches and the 3-State Outputs which are used for the output based on the data stored in them. When an input is set to logic Low, the latch is enabled and when an input is set to logic High, the data is disabled and the output will be High-Impedance state. The chip is also designed to be tolerant to noise and operate under noisy conditions. The 3-State Input and Output pins help to reduce EMI/EMC noise which helps to reduce the effect of radiation and interference.

Conclusion:

SN74LVC373ANSR is a desirable choice for low voltage applications, it is suitable for multiplexing, simplifying circuit design and reducing development cost. It also contains four 3-State Inputs and eight 3-State Outputs to help reduce EMI/EMC noise. It is a great choice for low voltage logic applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description