SN75112DR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN75112DR is a type of interface device used in various types of digital circuits. It is classified as a driver, receiver and transceiver, and is used to connect two or more circuits together. It can be used to transmit digital signals from one circuit to another, or to receive digital signals from one circuit and process them for use in another circuit.

The SN75112DR operates by sending and receiving digital signals along a common line, which is usually connected to two circuits. It has input, output, and enable pins, and a pair of power pins that can either be connected to a +5V power supply or directly to the logic circuit. When the enable pin is set to a logic high state, the device will operate as a driver, and will output either a logic high or a logic low signal depending on the input signal. When the enable pin is set to a logic low state, the device will operate as a receiver, and will output the same signal as the input signal.

The SN75112DR can also be used as a transceiver, allowing data to be sent over the same line in both directions. This is done by using the enable pin in alternating states; when the enable pin is set to a logic high state, the device will operate as a driver, and will output the data on the input line to the output line. When the enable pin is set to a logic low state, the device will operate as a receiver, and will receive the data on the input line and output it to the output line.

The SN75112DR is an inexpensive interface device that is simple to use and can be used in multiple applications. It can be used to facilitate communication between different circuits, or as an input/output device to send and receive data. It is used in a wide range of applications such as industrial, automotive, and medical systems, and is a reliable and cost-effective component for many digital circuits.

The specific data is subject to PDF, and the above content is for reference