SN75154DR

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Active
Type:	Receiver
Protocol:	RS232
Number of Drivers/Receivers:	0/4
Duplex:	--
Receiver Hysteresis:	3.3V
Data Rate:	--
Voltage - Supply:	4.5 V ~ 5.5 V
Operating Temperature:	0°C ~ 70°C
Mounting Type:	Surface Mount
Package / Case:	16-SOIC (0.154", 3.90mm Width)
Supplier Device Package:	16-SOIC
Base Part Number:	SN75154

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SN75154DR Application Field and Working Principle

Introduction

The SN75154DR is an integrated circuit component manufactured by Texas Instruments, Inc. It is a dual-channel non-inverting high speed TTL interface chip with the ability to drive and receive TTL logic systems. The component was designed for use in a wide range of applications such as in digital computer systems, communication systems, industrial control systems and several types of instrumentation.

Application Field

The SN75154DR is used in a wide range of applications as an interface between TTL digital systems. It is used in communication systems as a high speed data transfer component, in digital computer systems as a link between processor, memory and input/output devices, and in industrial control systems as an interface between the host and control components. Additionally, the component can be used in instrumentation systems where the speed of the interface is of importance, such as in medical systems and robotics.

Working Principle

The SN75154DR Dual TTL interface component works on the same basic principles as used in any TTL system. It is based on the N-Channel MOSFET transistor which is used to construct the basic gates and circuits in which the component operates. In the case of the SN75154DR, the device consists of two inverting buffers and a series of gates which are designed to drive and receive TTL logic signals from each channel.The component contains an output stage consisting of two N-Channel MOSFET transistors. These transistors are used to drive the TTL signals with sufficient power to feed any type of TTL logic circuit. The transistors are connected such that they can provide a negative logic output as well as a regular logic output. This is done by connecting the ground on one side to the bottom of the transistor and the other side connected to the common of the logic circuit.In the input stage of the SN75154DR, two P-Channel MOSFET transistors are employed. These transistors are used to detect the TTL logic signals and pass them on to the output stage if they fall within the specifications set by the component. The transistors also provide some level of noise suppression and protection from over-voltages in the circuit. The component is designed to operate with a wide range of logic voltages, from 5V to 15V. This ensures that the component can be used in a wide range of applications without the need to re-engineer the component.

Conclusion

The SN75154DR from Texas Instruments is a dual-channel non-inverting high speed TTL interface component designed for use in a variety of applications. It works by employing a set of N-Channel MOSFET transistors in the output stage and two P-Channel MOSFET transistors in the input stage. These transistors allow the component to drive and receive TTL logic signals while providing level of noise suppression and protection. The SN75154DR is a versatile component which can be used in a variety of applications, from communication systems to industrial control systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description