SN75175D

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SN75175D is a quad differential line receiver designed for use in digital systems, designed to be interfaced with a variety of systems including microprocessors and data communications drivers and receivers. It is designed to replace up to five individual line drivers, receivers and transceivers. It is capable of driving and receiving data on four separate lines for a total of eight channel operations.

The SN75175D is a wide supply voltage device, operating off of a single 5-volt supply or 2-volt to 5-volt divided supply. Its input and output voltages are typically in the range of 0.2 to 3 volts with a high output impedance which allows that it can be optimized for digital signaling, as well as providing electrical characteristics suitable for other data transmission and signal processing applications.

Application Field

The SN75175D can be used as part of signal processing applications, in particular, communications and data transmission. It can be used in both point-to-point and multi-point data systems, in a variety of applications where data may need to be shared between multiple devices.

The SN75175D is also particularly useful for controlling logic gates. It is ideal for applications where the logic state must be maintained over the full system operating range, as its inputs can accept logic voltages from 0.2 to 5.5 volts.

The SN75175D is suitable for use in embedded systems, where it can be used to increase the amount of data that can be transferred between individual chips. It can also be used as part of computer-based data acquisition and control applications, or as part of a serial data package.

Working Principle

The SN75175D is a quad differential line driver and receiver integrated circuit, with separate input and output sections. The device has four line inputs, which accept logic voltages from 0.2 to 5.5 volts and a maximum of 8 mA. The line inputs are then driven by the line drivers, which provide outputs that are capable of driving up to 200 milliamps per pin. Both the line inputs and outputs signals can be configured as either open collector (disabled) or open drain (enabled) signals.

The device\'s line receivers also allow for monitoring of both input and output signals. The line receivers are capable of accepting logic levels of 0.2v to 5.5v, where a valid logic level is present. The device will not register any logic level lower than 0.2v as a valid logic level.

The device is also capable of driving and receiving data simultaneously on all four lines, which allows for a total of eight channel operations. The device\'s use of line drivers and receivers allows for higher data rates than other similar transceivers and provides robust electrical characteristics suitable for digital signaling.

Conclusion

The SN75175D is a quad differential line receiver and driver, designed for use in digital systems and applications. It is capable of driving and receiving data on four separate lines, for a total of eight channel operations. The device has a wide supply voltage operating range, from 5 volts to 2 volts and is capable of monitoring logic levels from 0.2 volts to 5.5 volts.

The SN75175D is a practical and cost-effective solution for applications where high data rates, low noise levels and small circuit sizes are important. It is suitable for a variety of applications, including embedded systems and data acquisition and control applications.

The specific data is subject to PDF, and the above content is for reference