SN75ALS057DW

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

SN75ALS057DW devices are primarily used as a simple line driver and is a member of the Texas Instruments family of line drivers. This device is used for the interfacing of low voltage logic to the protocol of high-voltage drivers and receivers. In an interconnect system, these drivers and receivers will transfer data from one end to the other via serial communication. The SN75ALS057DW is one of the most commonly used line drivers, as it has several advantages over other line drivers, such as being inexpensive, low power requirements and good noise immunity.

The SN75ALS057DW is an open-drain line driver and receiver and is generally used in high-speed data communication applications. In the IEEE standard 802.3, the SN75ALS057DW is the first device to be used in the connection of two banks of devices. It is compliant with several communication standards, including RS485, RS232, and some versions of CanBus.

The SN75ALS057DW has an operating voltage range of 2.7V to 5.5V and a peak output current of 30mA. It includes four power-on reset (POR) inputs, six disabled outputs, and two outputs. The four POR inputs, which are connected to the four separate power management modules, provide a way to reset the driver to their default states. The six disabled outputs can be used to disable the SN75ALS057DW in the event of a power fault or the device being disconnected. Finally, the two outputs are used for the communication between the two banks of devices.

The SN75ALS057DW can support up to 28V of output voltage, which makes it suitable for driving high-voltage amplifiers. The device also supports up to 10MHz of data speed, allowing for fast communication speeds in applications. The device is also protected against ESD, making it suitable for use in harsh environments.

The SN75ALS057DW works on the principle of open-drain logic. When the device is in the inactive state, the POR and driver outputs are high impedance or off. When the device is activated, the POR and driver outputs are connected to the input signals. If one of the input signals is high, the output of the driver is turned on, driving the output voltage high. If one of the inputs to the SN75ALS057DW is low, the output will remain low.

The SN75ALS057DW is a valuable tool for interfacing two banks of devices, as it provides good noise immunity, is easy to use and is relatively low power. It can be used in a wide range of applications, including automotive, industrial, security and networking applications. With its high reliability and good performance, the SN75ALS057DW is an ideal choice for line driver applications.

The specific data is subject to PDF, and the above content is for reference