SP3238EEA-L/TR Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SP3238EEA-L/TR is part of a robust line of transceivers used in many different applications. Each device provides an interface between the data lines and the circuitry framework. The SP3238EEA-L/TR promises improved overall signal integrity and offers various configurations and power levels that meet the most demanding performance requirements.

The SP3238EEA-L/TR is an integrated transceiver circuit, consisting of one receiver and one driver. This versatile device is capable of being configured to either a single driver, or a dual transceiver configuration. This configuration flexibility allows it to be effectively used in two different applications; either single-ended bus or unidirectional communication loops. In the single ended bus configuration, the SP3238EEA-L/TR enables the data to travel in both directions in the same data line. Alternatively, by replacing the single driver with the dual transceiver, the device can act as a set of transmitters and receivers in a unidirectional loop.

The receiver of the SP3238EEA-L/TR senses the logic level of the incoming data, using a comparator circuit. In this configuration, the logic levels of the data are compared against the reference voltage of the Vref pin at the receiver, and the output is provided with either a logic low or logic high. The reference voltage is provided through an external resistor and is used to set the detection threshold of the data. When the threshold is met, the data is converted to either a logic 0 (low level) or a logic 1 (high level) and passed on to the driver.

The driver is designed to provide a maximum output voltage of up to 400-mV, making it ideal for a wide range of applications. The output of the driver is controlled by the input logic level of the data received by the receiver. If the logic level of the data is low (logic 0) then the output will remain low (ground). If the logic level of the data is high (logic 1) then the output will be electrically drawn to the VDD voltage.

The SP3238EEA-L/TR also includes various safety features to ensure optimal signal integrity. First, there is a slew-rate/delay control feature which limits the rate at which each driver’s output voltage can transition. This prevents data signal distortion, allowing the data to pass through without signal degradation. Secondly, the circuit also includes a thermal shutoff feature which is designed to detect any rapid changes in temperature and shut down the system if necessary. This provides the additional benefit of protecting the other components of the system from damage due to operational faults.

The SP3238EEA-L/TR is commonly used to provide an interface between data lines and the rest of the circuit. Its flexible feature set, robust operation, and improved signal integrity ensure that it is well suited for many different applications. This transceiver provides a reliable and cost-effective solution to a wide range of needs and requirements.

The specific data is subject to PDF, and the above content is for reference