SP491EN-L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The SP491EN-L is a serial port transceiver designed for low-power and reliable data transmission applications. It is widely used in point-to-point, multi-point, and point-to-multipoint serial communication. It can connect two or more devices together and communicate with each other through a serial port.

The SP491EN-L is a low-power transceiver with an operating voltage range of 3.3V to 5V. Its high speed supports up to 57.6Kbps, making it ideal for applications requiring high data transfer rates. Its low-power feature enables extended battery life for portable equipment. The SP491EN-L is available in both SPI and UART versions.

The SP491EN-L is capable of performing various operations such as 9-bit, 8-bit, 7-bit, and 6-bit data transmission. It also supports various serial communication protocols such as asynchronous, synchronous, and multi-drop with up to 8-bytes. The driver modes allow it to be used as a slave or master. Its receiver supports a variety of signal types including non-inverted, inverted, 1-start bit, 2-stop bits, and parity-enabled signals.

The SP491EN-L transceiver works through the principle of constant voltage, current, and frequency operation. It transfers data by enabling/disabling the signals to an internal buffer. This allows the transceiver to store data from the serial port and send the data in a predetermined order. The transceiver can also be used as a receiver by monitoring the incoming data and storing it in an internal buffer for further processing.

The SP491EN-L transceiver has multiple modes of operation such as half-duplex and full-duplex. In full-duplex mode, the transceiver can send and receive data simultaneously using both the RX and TX signals. In half-duplex mode, the transceiver can only send and receive data sequentially, using only the RX or TX signal. It also allows for two-wire handshaking and four-wire handshaking protocols. The two-wire handshaking protocol is used to transmit data in a single direction, while the four-wire handshaking protocol is used to transfer data in both directions.

The SP491EN-L is a robust and reliable transceiver that offers a wide range of applications, including long-distance serial communication, data transfer, data acquisition, control systems, multimedia, surveillance systems, and communication networks. Its low power consumption and high data transfer rates make it ideal for applications where extended battery life is important. The transceiver is also well-suited for applications requiring both low power and high throughput. Through its multiple communication protocols and modes of operation, the SP491EN-L transceiver is an excellent choice for many data transfer applications.

The specific data is subject to PDF, and the above content is for reference