SP810EK-L-4-4/TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Power management integrated circuits (PMICs) are used in a wide variety of applications, from enabling the operation of small microcontroller-driven circuits to powering entire systems-level computing platforms. The SP810EK-L-4-4/TR is a type of PMIC supervisory device, a device specifically designed to monitor, control, and protect system power. This article will discuss the application fields and working principles of the SP810EK-L-4-4/TR.

The SP810EK-L-4-4/TR is a four-channel PMIC supervisor IC, designed to monitor and protect system power sources. It is typically implemented within IC packages to enable better overall system performance. The SP810EK-L-4-4/TR can monitor signals from four distinct voltage sources, each of which can be sourced from either an integrated voltage regulator or an external power source.

The SP810EK-L-4-4/TR is well suited for use in portable and low-power electronics, including mobile phones, laptops, portable computers, digital cameras, medical devices, consumer electronics, and automotive electronics. Additionally, the SP810EK-L-4-4/TR can be used in LCD, TFT, and OLED flat panel displays.

The SP810EK-L-4-4/TR is capable of monitoring and protecting against power faults, including undervoltage, overvoltage, power source noise, power supply overvoltage, and brownouts. It also features programmable reset time delay, power-on reset (POR) time delay, and adjustable power-on reset threshold. This makes the SP810EK-L-4-4/TR ideal for power management in embedded systems, as it can be configured to perform specific functions depending on the needs of the system.

The SP810EK-L-4-4/TR is based on a voltage-sense process that is used to monitor and control system power. This voltage-sensing process allows the SP810EK-L-4-4/TR to monitor up to four dedicated voltage sources and predict system power events such as overvoltage, undervoltage, current limit, and reset. The voltage-sensing process also allows the SP810EK-L-4-4/TR to adjust the power-on reset threshold based on the detected system power events.

The SP810EK-L-4-4/TR also contains a reset controller that can be used to generate an interrupt output when a single input is asserted, as well as detect time-based reset events, such as a watchdog timer reset and power-on reset (POR). The SP810EK-L-4-4/TR can also be configured to generate a reset signal when a system voltage reaches a programmable threshold.

The SP810EK-L-4-4/TR also contains a number of advanced features including an automatic-switchover circuit, clock output, and an integrated voltage regulator. The automatic-switchover circuit is used to detect a system-level fault condition, such as an overvoltage or undervoltage, and automatically switch the connected power source to an alternate power source. The clock output provides an adjustable frequency output that can be used to synchronize existing system clocks or generate pulses for triggering interrupts. Finally, the integrated voltage regulator provides clean, regulated power to the system, allowing for optimal system performance.

In summary, the SP810EK-L-4-4/TR is an advanced PMIC supervisory device that is ideally suited for use in embedded systems. It is capable of monitoring and protecting against power faults, providing programmable reset time delay, adjustable power-on reset threshold, automatic switchover, clock output, and an integrated voltage regulator. As such, it can provide a cost-effective solution for power management in a wide variety of embedded applications.

The specific data is subject to PDF, and the above content is for reference