SQP10AJB-51K

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors are designed to help regulate current flow and lend their electrical stability to any circuitry. The SQP10AJB-51K corresponds to this specific component and is suitable for a range of applications. By learning more about this resistor’s design, you can make the most of its features.

Features

The SQP10AJB-51K through hole resistor is 5% precision type, meaning the circuit parts with this specific resistor will provide a slightly lower current than what is actually indicated from typical 5% resistors. It offers a voltage rating of up to 50V, meaning it is capable of handling up to 50 volts. The SQP10AJB-51K resistor is also manufactured to exact tolerances and with high levels of reliability. This ensures a high-quality resistance to an array of electronic systems.

The SQP10AJB-51K is considered a datasheet resistor—appropriate for use in any circuit board operating on low or medium DC or AC voltage. It consists of a carbon film through hole resistor that is encapsulated with phenolic material. The SQP10AJB-51K is stability limited dimensions, meaning the size of the resistor does not effect the performance and it also includes a capacitor that ensures the stability of the system.

Working Principle

The SQP10AJB-51K is specifically designed to regulate current flow in electronic circuits. The resistance of the resistor is measured in ohms, and is typically a small value. This resistor acts to reduce the amount of current that makes it through to the output. The amount of current is determined by the resistance of the component and the voltage that is passed through the resistor

The resistor’s job is to impede the flow of current and thereby reduce the voltage. By impeding the flow of current, the voltage drop across the resistor is likely to be small. This reduces the amount of energy delivered to the circuit, and the energy that is saved is dissipated as heat. This heat is converted back into electrical energy and dissipated as current on the circuit, thus regulating the current flow.

Internally, the SQP10AJB-51K consists of one or more thick layers of a material, such as carbon or other type of conductor, that is bonded to the substrate. Carbon has a higher resistance than metals, and this is the basis of the operation of the component. The amount of current that can flow through the resistor is limited by the resistance of the layer.

Typically, the SQP10AJB-51K is made of a metal alloy and is most commonly used as a resistor in circuits. The alloy is chosen based on its specific properties such as its resistance, temperature coefficient, and breakdown voltage rating. The alloy is designed to limit the current flow to the exact level that is mandated by the circuit requirements. This ensures that the circuit functions as designed as the voltage to the output is prevented from rising prematurely, thereby preventing any damage to components that could be caused due to the increased current flow.

Applications

The SQP10AJB-51K through hole resistor is suitable for a wide range of applications. It is appropriate for use in low-voltage circuit boards and is commonly used in mains supplies, regulators, power supplies, and current limiting circuits. It is also appropriate for circuit boards operating on DC or AC voltage. The resistor can also be used to control the size of power pulses, to limit the speed of motors or electronic components, and to provide current spikes for drivers and other circuit components.

The SQP10AJB-51K is ideal for use in industrial, automotive, and consumer electronics applications. Its small size makes it ideal for compact products where physical space is at a premium. The accurate current-limiting properties allow for precise control over the current that is delivered to the output of a device.

The SQP10AJB-51K’s through-hole design also aids in cooling and ensures better reliability and electrical stability of the component. The component is also immune to mechanical vibrations, which makes it a good choice for applications where vibration levels can be high.

The SQP10AJB-51K through hole resistor is an effective and reliable component that is suitable for a range of applications. Its features make it an ideal choice for circuit boards that are operating on high or low voltage, and its small size allows it to be used in small PCBs. This resistor can help you regulate the flow of current in your circuits and provide the necessary electrical stability.

The specific data is subject to PDF, and the above content is for reference