Series:	SQP
Packaging:	Bulk
Part Status:	Active
Resistance:	360 Ohms
Tolerance:	±5%
Power (Watts):	15W
Composition:	Wirewound
Features:	Anti-Arc, Flame Proof, Moisture Resistant, Safety
Temperature Coefficient:	±300ppm/°C
Operating Temperature:	-55°C ~ 155°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.492" Square x 1.890" L (12.50mm x 48.00mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors are a type of resistor used for providing a resistance value to components, such as electrical circuits or motors. These resistors are integrated into systems to limit the amount of current which passes through a given circuit. The most common type of through-hole resistor is the SMD or surface mounted device, but there are a variety of other designs including the SQP15AJB-360R. The SQP15AJB-360R is a through hole resistor designed for high wattage applications and features a 360 degree rotatable body. The resistor itself consists of a metal oxide film (MOF) with a resistance typical application range of 5-25 ohms. The MOF film is then coated with epoxy resin to provide protection from moisture, dust or other contaminants. This type of resistor can provide a higher wattage than many other standard through hole resistors yet still maintain a low heat sink due to its special design. This particular resistor is designed for industrial applications and can be used for a variety of different tasks. It is commonly used in automotive and industrial systems, such as power supplies, motors and lighting. The resistor can be used to limit the current passed through the circuit, thereby protecting the circuit from overloads or short circuits. It can be used with AC or DC voltage sources and it is important to choose the correct wattage for the resistor in order to avoid circuit damage due to high temperatures. The resistor\'s construction consists of a flexible metal oxide film with a layer of epoxy resin protecting it. The epoxy resin prevents moisture or other contaminants from interacting with the MOF, and the contact between the film and the printed circuit board (PCB) is done through soldering. The soldering ensures that the resistor remains securely in place and properly connected to the system. This type of resistor is also available in a variety of other designs, such as axial, radial and vectored which can be used in different applications.When operating, the SQP15AJB-360R resistor works by creating an electrical resistance to the current. This allows the current to flow at a lower voltage, thereby increasing the safety of the system. The resistance value of the resistor is determined by the size of the MOF layer and the type of coating. When selecting a resistor, it is important to ensure that the wattage rating is sufficient for the application. Overheating of the resistor can occur if the wattage rating is exceeded. Additionally, it is important to ensure that the resistor is suitable for the application and environment. In conclusion, the SQP15AJB-360R is a through hole resistor designed for high wattage applications and can be used in a variety of industrial and automotive systems. This type of resistor is constructed with a metal oxide film and epoxy resin coating for protection from moisture and other contaminants. The resistor works by allowing current to pass through it at a lower voltage and with a predetermined resistance value. It is important to consider the wattage rating as well as the environmental requirements when selecting a resistor for an application.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description